Welcome

`);\n});\n```\n\n---\n\nTownie, stop here! Ask for permission to proceed.\n\n---\n\n## Architecture Validation\n\nBefore proceeding, verify your implementation follows the architecture:\n\n- Services only make direct API calls (no environment variables, no orchestration)\n- Controllers handle business logic and coordinate services\n- Routes only handle HTTP concerns and call controllers\n- No service calls directly from routes\n- Environment variables handled in controllers, not services\n- Consistent response patterns across all layers\n\n### Expected Behavior\n\nThe health endpoint should return:\n\n```\n{\n \"status\": \"ok\",\n \"timestamp\": \"2025-07-14T18:26:28.270Z\",\n \"service\": \"glance-demos\",\n \"databases\": {\n \"configured\": true,\n \"demos\": \"connected\",\n \"content\": \"connected\",\n \"interactions\": \"connected\"\n }\n}\n```\n\nThis architecture is intended to create clear separation of concerns and should make the codebase maintainable and testable.\n\n---\n\n**Townie, stop here! Before proceeding to additional steps, confirm that this step is working correctly.**\n\nIf everything is working as intended, tell the user that they can proceed to the next step: auth. Don't write any code.\n\n---\n",[],[99,170],{"_104":179,"_95":180,"_152":181,"_154":153,"_155":138,"_156":182,"_158":22,"_106":183,"_100":32,"_161":174,"_163":184,"_164":22,"_165":-5,"_166":185,"_98":186},"b938ff9a-724b-11f0-b8f0-0224a6c84d84","11-PDF-EMBEDS.md","b9390062-724b-11f0-b8f0-0224a6c84d84",7,["D",1754433000403],"# Complete Instructions for Implementing PDF Embed Handling in BlockRenderer.tsx\n\n## Objective\n\nUpdate the `embed` case in `/frontend/components/BlockRenderer.tsx` to handle PDF embeds from `glance-pdf-embed.val.run` with special rendering while maintaining fallback for other embed types.\n\n## Exact Implementation Steps\n\n1. **Locate the target code**: Find the `case 'embed':` block in the switch statement (around lines 333-343)\n2. **Replace the entire case block** with this exact code:\n\n case 'embed':\n const url = blockData?.url || '';\n\n // handle the special case of the PDF embed, which rewrites the placeholder embed as a PDF link\n // note that the slug below builds a link to the PDF at /demo/:id/pdf\n // and has the Glance className to render it in the Glance PDF viewer: a.pdf\n if (url.includes(\"glance-pdf-embed.val.run\")) {\n const slug = [location.pathname, \"pdf\"].join(\"/\");\n return (\n

\n \n Try the PDF viewer\n \n

\n );\n }\n\n return (\n

\n Embedded content: {url}\n

\n {renderChildren()}\n

\n );\n\n## Key Requirements\n\n- **Preserve existing classes**: Must include `pdf pdf-download-btn` classes\n- **URL detection**: Check if `url.includes(\"glance-pdf-embed.val.run\")`\n- **Dynamic routing**: Build PDF link as `[location.pathname, \"pdf\"].join(\"/\")`\n- **Tailwind styling**: Use standard primary button classes with focus ring\n- **Fallback behavior**: Maintain existing generic embed rendering for non-PDF embeds\n- **Structure**: PDF case returns early, generic case handles `renderChildren()`\n\n## Expected Behavior\n\n- PDF embeds from `glance-pdf-embed.val.run` render as blue button linking to `/current-path/pdf`\n- All other embeds render with existing gray box + link display\n- Button has proper hover and focus states for accessibility\n- Existing functionality dependent on `pdf pdf-download-btn` classes preserved\n",[],[99,180],{"_104":188,"_95":189,"_152":190,"_154":153,"_155":138,"_156":101,"_158":22,"_106":191,"_100":32,"_161":174,"_163":192,"_164":22,"_165":-5,"_166":193,"_98":194},"b94757b6-724b-11f0-b0a7-0224a6c84d84","2-AUTH.md","b9475856-724b-11f0-b0a7-0224a6c84d84",["D",1754433000342],"# Complete Authentication Implementation Instructions\n\n## Townie instructions (Townie should follow these)\n\nRead through all of these instructions in order to understand the architecture of this Val, and implementation details important to this Val, and then once you have it all in your memory you should get to work.\n\nIf anything is unclear, you should stop and ask me for clarification before proceeding. Do not write code if you are unsure of what is expected.\n\n**Important:** there are checkpoints in these instructions where you are directed to stop and ask permission before proceeding. Follow those instructions and do not proceed without permission.\n\n## LastLogin Built-in Features\n\n**Important:** LastLogin automatically handles certain routes and authentication flows:\n\n- **`/auth/logout`** - LastLogin intercepts this route and handles logout automatically\n- **No custom logout route needed** in your Hono app\n- **Simply link to `/auth/logout`** and LastLogin will clear the session and redirect\n- **Authentication headers** - LastLogin adds `X-LastLogin-Email` header for authenticated requests\n\n**Authentication Flow:**\n\n1. **Unauthenticated requests** → LastLogin checks for session\n2. **No session** → Returns 401 or redirects to login\n3. **Valid session** → Adds `X-LastLogin-Email` header and passes to your app\n4. **`/auth/logout` requests** → LastLogin clears session automatically (never reaches your app)\n\n## Step 1. Core Architecture Setup\n\n### Main Application (main.tsx)\n\n**Add global authentication middleware to `main.tsx`:**\n\n```typescript\nimport { lastlogin } from \"https://esm.town/v/stevekrouse/lastlogin_safe\";\n\n// Import route modules\nimport authCheck from \"./backend/routes/authCheck.ts\";\n// other route modules\n\nconst app = new Hono();\n\n// Apply global authentication middleware to ALL routes\napp.use(\"*\", authCheck);\n\n// other routes\n\n// Export with LastLogin wrapper\nasync function handler(request: Request): Promise {\n return app.fetch(request);\n}\n\n// Wrap and export the main HTTP handler with lastlogin\nexport default lastlogin(handler);\n```\n\n### Dashboard Route Organization\n\n**Best Practice: Separate the root dashboard route from main.tsx**\n\nInstead of defining the root route directly in `main.tsx`, create a dedicated dashboard route file:\n\n- **Create**: `/backend/routes/dashboard.tsx`\n- **Purpose**: Handle the authenticated user's main dashboard/landing page\n- `import dashboardRoute from \"./backend/routes/dashboard.tsx\";`\n- **Mount in main.tsx**: `app.get(\"/\", dashboardRoute)`\n\nThis approach:\n\n- Keeps `main.tsx` focused on app setup and middleware\n- Makes the dashboard logic easier to maintain and test\n- Follows the modular architecture pattern used throughout the app\n- Allows for easier dashboard enhancements without touching core routing\n\nThe dashboard route should:\n\n- Display user information (email from `c.get(\"userEmail\")`)\n- Display the `/api/health` endpoint results as raw JSON in a

 tag; e.g., JSON.stringify(data, null, 2)\n- Include logout functionality via `/auth/logout`\n- Show a simple and professional welcome interface with minimal styling\n\n### Create `/backend/routes/authCheck.ts`\n\n**Authentication Middleware:**\n\n- Retrieve the user's email: `const email = c.req.header(\"X-LastLogin-Email\")`\n- If email exists, the user is authenticated - store in context and continue to your app\n- If no email, show login page with LoginWithGoogleButton\n- **Note:** You don't need to handle `/auth/logout` - LastLogin does this automatically\n\n**Login Page Requirements:**\n\n- `import { LoginWithGoogleButton } from \"https://esm.town/v/stevekrouse/LoginWithGoogleButton\"`\n- Use the `` React Component, optionally supplying the `text` attribute\n- Add \"via LastLogin\" underneath LoginWithGoogleButton, centered, secondary text, linking to https://lastlogin.io/\n- Pass the email from the server to the client-side code if using React hydration or similar techniques\n\n**For authenticated users:**\n\n- Store email in context: `c.set('userEmail', email)`\n- In your authenticated views, add logout functionality: `Logout`\n\n**Public Routes Whitelist:**\n\n- Add a `PUBLIC_ROUTES` array at the top for routes that should be accessible without authentication\n- **Don't include `/auth/logout`** in the whitelist (LastLogin handles it before your middleware runs)\n- Use for truly public routes like: `/demo/:id`, `/api/health`, static assets, etc.\n\nIf you encounter problems loading the React button, try this simple approach for authCheck.ts:\n\n```typescript\n// Public routes that don't require authentication\nconst PUBLIC_ROUTES = [\n  // Add public routes here as needed\n  // '/demo/:id',  // Example: public demo viewing\n  // '/api/public', // Example: public API endpoints\n];\n\n// Helper function to check if a route is public\nfunction isPublicRoute(path: string): boolean {\n  return PUBLIC_ROUTES.some((route) => {\n    // Handle exact matches\n    if (route === path) return true;\n\n    // Handle wildcard patterns (basic implementation)\n    if (route.includes(\"*\")) {\n      const pattern = route.replace(\"*\", \".*\");\n      return new RegExp(`^${pattern}$`).test(path);\n    }\n\n    // Handle route parameters (basic implementation)\n    if (route.includes(\":\")) {\n      const pattern = route.replace(/:[^/]+/g, \"[^/]+\");\n      return new RegExp(`^${pattern}$`).test(path);\n    }\n\n    return false;\n  });\n}\n\nexport default async (c, next) => {\n  // Allow public routes to bypass authentication\n  if (isPublicRoute(c.req.path)) {\n    await next();\n    return;\n  }\n\n  const email = c.req.header(\"X-LastLogin-Email\");\n\n  if (!email) {\n    // Show login page if not authenticated\n    return c.html(`\n      \n      \n      \n        Your App - Login Required\n      \n      \n        \n          Sign in
\n          Sign in to access your app.
\n          \n            Loading login button...
\n          
\n          \n            via LastLogin\n          
\n        
\n\n        \n      \n      \n    `);\n  }\n\n  // If authenticated, store email in context for use by routes\n  c.set(\"userEmail\", email);\n\n  // Continue to the next middleware/route\n  await next();\n};\n```\n\n## Common Gotchas\n\n**Logout Route:**\n\n- ❌ Don't create a custom `/auth/logout` route in your Hono app\n- ✅ Just link to `/auth/logout` - LastLogin handles it automatically\n- The logout link will work for authenticated users without any custom code\n- LastLogin intercepts `/auth/logout` at the wrapper level before it reaches your middleware\n\n**Public Routes:**\n\n- Use the whitelist in authCheck.ts for routes that should be accessible without authentication\n- `/auth/logout` doesn't need to be whitelisted (LastLogin handles it before your middleware runs)\n- Examples of routes that should be whitelisted: public demos, health checks, static assets\n\n**Authentication Headers:**\n\n- Authenticated requests will have `X-LastLogin-Email` header\n- Unauthenticated requests will not have this header\n- LastLogin wrapper handles session validation before your code runs\n\n**Error Handling:**\n\n- If LastLogin can't validate a session, it returns 401 before reaching your app\n- Your authCheck middleware only runs for requests that pass LastLogin's validation\n- No need to handle session expiration - LastLogin manages this\n\n---\n\n**Townie, stop here! Before proceeding to additional steps, confirm that this step is working correctly.**\n\nIf everything is working as intended, tell the user that they can merge this branch into main, and then they can proceed to the next step: webhook authentication. Don't write any code.\n\n---\n",[],[99,189],{"_104":196,"_95":197,"_152":198,"_154":153,"_155":138,"_156":199,"_158":22,"_106":200,"_100":32,"_161":174,"_163":201,"_164":22,"_165":-5,"_166":202,"_98":203},"b92f4126-724b-11f0-8df8-0224a6c84d84","3-WEBHOOKS.md","b92f4202-724b-11f0-8df8-0224a6c84d84",5,["D",1754433000299],"# Webhook Authentication Architecture Instructions\n\n## Townie instructions (Townie should follow these)\n\n## Middleware Order\n\nPlace authentication middleware in the following order:\n\n1. **Notion webhook auth middleware** (X-API-KEY for `/tasks/*`)\n2. **Global user auth middleware** (for other protected routes)\n3. **Route handlers**\n\n## Webhook Authentication\n\n### Scope\n\n- Apply only to routes under /tasks/\\*\n- All /tasks endpoints expect POSTs from Notion webhooks\n\n### Implementation\n\n- Create `/backend/routes/webhookAuthCheck.ts`\n- Extract X-API-KEY header from incoming requests\n- Compare against NOTION_WEBHOOK_SECRET environment variable\n- Use constant-time comparison to prevent timing attacks\n- Return 401/403 for authentication failures with generic error messages\n- Log failed authentication attempts for monitoring\n\n### Route Implementation Requirements\n\n**CRITICAL:** All webhook routes MUST use POST method:\n\n```\n// ✅ CORRECT - Webhooks are POST requests\napp.post(\"/webhook-endpoint\", async (c) => {\n  // Handle webhook\n});\n\n// ❌ WRONG - This won't work with webhooks\napp.get(\"/webhook-endpoint\", async (c) => {\n  // Webhooks can't reach this\n});\n```\n\nWhy: Notion (and most webhook providers) send POST requests, never GET.\n\n### Middleware Application (EXACT CODE)\n\nApply middleware in this EXACT order in main.tsx:\n\n```\n// 1. Webhook auth - ONLY for /tasks/* routes\napp.use(\"/tasks/*\", webhookAuth);\n\n// 2. User auth - for ALL routes EXCEPT /tasks/*\napp.use(\"/api/*\", authCheck);\napp.use(\"/views/*\", authCheck);\napp.use(\"/\", authCheck);\n\n// Add root route - now serves the authenticated dashboard\napp.get(\"/\", dashboardRoute);\n\n// 3. Mount routes AFTER middleware\napp.route(\"/tasks\", taskRoutes);\n```\n\n**Important:** We've changed the global authentication from app.use(\"\\*\") to more specific auth route handling.\n\n**Before:**\n\n```\napp.use(\"*\", authCheck);  // Applied to ALL routes including /tasks/*\n```\n\n**After:**\n\n```\napp.use(\"/api/*\", authCheck);   // Applied to API routes\napp.use(\"/views/*\", authCheck); // Applied to view routes\napp.use(\"/\", authCheck);        // Applied to root route\n```\n\n**This ensures:**\n\n✅ `/` (root) still requires user authentication\n✅ `/api/*` routes still require user authentication\n✅ `/views/*` routes still require user authentication\n✅ `/tasks/*` routes only use webhook authentication (no user auth)\n\n**Common mistake:** Using app.use(\"\\*\", webhookAuth) - this applies to all routes incorrectly.\n\n### Flow Logic\n\n- Request to /tasks/\\* → Check X-API-KEY → If valid, proceed to route handler (skip global auth)\n- Request to /tasks/\\* → Check X-API-KEY → If invalid, return 401 (never reaches global auth)\n- Request to other routes → Skip webhook auth → Go to global auth → Then route handler\n\n### Testing Webhook Authentication\n\nTest in this exact order:\n\n1. **Test without header** (should fail):\n\nPOST /tasks/test\nExpected: 401 \"Authentication required\"\n\n1. **Test with wrong key** (should fail):\n\nPOST /tasks/test\nHeaders: {\"X-API-KEY\": \"wrong-key\"}\nExpected: 403 \"Authentication failed\"\n\n1. Test with correct key (should succeed):\n\nPOST /tasks/test  \n Headers: {\"X-API-KEY\": \"your-configured-secret-value\"}\nExpected: 200 (reaches your route handler)\n\n**If step 3 returns 404:** Your route is probably defined as GET instead of POST.\n\n### Debugging Webhook Auth Issues\n\nAdd this temporary debug endpoint:\n\n```\napp.get(\"/debug-webhook\", (c) => {\n  const secret = Deno.env.get(\"NOTION_WEBHOOK_SECRET\");\n  return c.json({\n    hasSecret: !!secret,\n    secretLength: secret?.length || 0,\n  });\n});\n```\n\n**Expected response:** {\"hasSecret\":true,\"secretLength\":>0}\n\nAdd this catch all endpoint:\n\n```\n// Catch-all handler for undefined webhook endpoints\n// This must be the LAST route defined to catch unmatched paths\napp.post(\"*\", (c) => {\n  const path = c.req.path;\n  const method = c.req.method;\n  const returnObj = {\n    error: \"Endpoint not found\",\n    path: path,\n    method: method,\n    availableEndpoints: [\n      \"GET /tasks/debug-webhook\",\n      \"POST /tasks/test\",\n      \"POST /tasks/notion-webhook\",\n    ],\n  };\n  console.log(returnObj);\n\n  return c.json(returnObj, 404);\n});\n```\n\n### Complete Working Example\n\nHere's a complete working webhook endpoint:\n\n```\n// backend/routes/tasks/_tasks.routes.ts\nimport { Hono } from \"npm:hono@3.12.12\";\n\nconst app = new Hono();\n\napp.post(\"/notion-webhook\", async (c) => {\n  // At this point, webhook auth has already passed\n  const body = await c.req.json();\n  console.log(\"Notion webhook received:\", body);\n\n  // Process the webhook...\n\n  return c.json({ success: true });\n});\n\nexport default app;\n```\n\nTest with:\n\nPOST /tasks/notion-webhook\nHeaders: {\"X-API-KEY\": \"your-configured-secret-value\"}\nBody: {\"test\": \"data\"}\nExpected: 200 {\"success\": true}\n\n## Security Considerations\n\n- Webhook middleware should return early (success or failure) without calling next()\n- Never pass webhook requests to the global auth middleware\n- Maintain complete separation between webhook auth and user auth mechanisms\n- Consider rate limiting on /tasks endpoints\n- Use generic error messages that don't reveal authentication mechanism details\n\n## Route Structure\n\n- /tasks/\\* → Webhook auth required (Notion POSTs)\n- /api/\\* → User auth required (if applicable)\n- /\\* → Public routes (static files, etc.)\n\n## Key Changes Made:\n\n1. Added Environment Setup section with clear instructions for setting real values (without revealing actual values)\n1. Added Route Implementation Requirements emphasizing POST method requirement\n1. Added exact middleware application code to prevent ordering mistakes\n1. Added comprehensive testing steps with expected responses (using generic placeholders)\n1. Added debugging section with tools to troubleshoot issues\n1. Added complete working example to verify implementation against\n1. Emphasized critical points with bold text and warning boxes\n1. Added common mistakes and how to avoid them\n\nThese revisions address all the issues we encountered while keeping sensitive values generic and secure.\n",[],[99,197],{"_104":205,"_95":206,"_152":207,"_154":153,"_155":138,"_156":208,"_158":22,"_106":209,"_100":32,"_161":174,"_163":210,"_164":22,"_165":-5,"_166":211,"_98":212},"b93e0c7e-724b-11f0-a644-0224a6c84d84","4-GLIMPSE.md","b93e0d32-724b-11f0-a644-0224a6c84d84",8,["D",1754433000438],"# Instructions for Adding /views/glimpse/:id Endpoint\n\nHere are the step-by-step instructions that would lead directly to the correct, clean implementation:\n\n## 1. Analyze the Requirements\n\n- Endpoint: GET /views/glimpse/:id\n- Authentication: Required (existing Google OAuth)\n- Input: Notion page ID (not database ID)\n- Output: JSON response with full service response (minus UI elements)\n- Data source: Notion page properties\n\n## 2. Examine Current Architecture\n\n### Check existing services to understand data access patterns\n\n```\ncat /backend/services/notion.service.ts\n```\n\n### Check existing routes structure\n\n```\ncat /backend/routes/views/\\_views.routes.ts\n```\n\n### Understand authentication flow\n\n```\ncat /main.tsx # Look for auth middleware setup\n```\n\n## 3. Identify Missing Service Method\n\n- Current service has getDatabaseById() for database metadata\n- Need getPageById() for individual page data\n- Service should return full Notion response for flexibility\n\n## 4. Add Service Method First\n\n```\n// Add to /backend/services/notion.service.ts\nexport async function getPageById(pageId: string) {\n  try {\n    const response = await notion.pages.retrieve({\n      page_id: pageId,\n    });\n    return {\n      success: true,\n      data: response,\n      timestamp: new Date().toISOString(),\n    };\n  } catch (error) {\n    return {\n      success: false,\n      error: error.message,\n      timestamp: new Date().toISOString(),\n    };\n  }\n}\n```\n\n## 5. Create Controller with Minimal Processing\n\n```\n// Create /backend/controllers/glimpse.controller.ts\nimport { Context } from \"npm:hono@3.12.12\";\nimport { getPageById } from \"../services/notion.service.ts\";\n\nexport async function glimpseHandler(c: Context) {\nconst id = c.req.param(\"id\");\n\nif (!id) {\n  return c.json({ error: \"Demo ID is required\" }, 400);\n}\n\nconst result = await getPageById(id);\n\nif (!result.success) {\n  return c.json({ error: \"Failed to fetch demo data\", details: result.error }, 500);\n}\n\n// Filter out button properties from the response\nif (result.data?.properties) {\n  const filteredProperties = Object.fromEntries(\n  Object.entries(result.data.properties).filter(([key, value]) => value?.type !== \"button\")\n);\n\n    result.data.properties = filteredProperties;\n\n  }\n\n  return c.json(result);\n}\n```\n\n## 6. Add Route\n\n```\n// Update /backend/routes/views/\\_views.routes.ts\nimport { Hono } from \"npm:hono@3.12.12\";\nimport { glimpseHandler } from \"../../controllers/glimpse.controller.ts\";\n\nconst app = new Hono();\n\napp.get(\"/glimpse/:id\", glimpseHandler);\n\nexport default app;\n```\n\n## 7. Update Documentation\n\n**Add to /backend/routes/views/README.md**\n\n### GET /views/glimpse/:id\n\n- **Purpose**: Returns Notion page data as JSON (filtered for data consumption)\n- **Authentication**: Required (Google OAuth)\n- **Parameters**: `id` - Notion page ID\n- **Response**: Service response object with Notion page data (button properties removed)\n- **Filtering**: Removes UI-specific properties (type: \"button\") for cleaner data consumption\n\n## 8. Key Design Principles\n\n✅ Controller Best Practices:\n\n- Single Responsibility: Controller handles HTTP concerns + minimal data cleanup\n- Thin Layer: Minimal processing, focused on improving data consumption\n- Useful Filtering: Remove UI elements that don't belong in data APIs\n- Consistent Error Handling: Standard error response format\n\n✅ Service Layer:\n\n- Data Access: Handle all Notion API interactions\n- Consistent Response Format: Always return {success, data/error, timestamp}\n- Raw Data: Return unfiltered data from external APIs\n\n✅ Separation of Concerns:\n\n- Controller: HTTP validation, routing, error responses, basic data cleanup\n- Service: External API calls, data retrieval\n- Client: Complex data processing, extraction, formatting\n\n## 9. Response Structure\n\n{\n\"success\": true,\n\"data\": {\n\"object\": \"page\",\n\"id\": \"notion-page-id\",\n\"properties\": {\n\"Name\": {\n\"type\": \"title\",\n\"title\": [{\"plain_text\": \"Demo Name\"}]\n},\n\"Status\": {\n\"type\": \"select\",\n\"select\": {\"name\": \"Active\"}\n}\n// Button properties filtered out\n}\n},\n\"timestamp\": \"2025-07-15T17:25:00.000Z\"\n}\n\n## 10. Key Decision Points\n\n✅ Correct Approach:\n\n- Data Source: Use notion.pages.retrieve() for page data\n- Controller Logic: Keep minimal but include useful data cleanup\n- Property Filtering: Remove UI-specific elements (buttons) that don't belong in data APIs\n- Error Handling: Consistent service response pattern\n\n✅ Appropriate Controller Processing:\n\n- UI Element Removal: Filter out button properties (not data)\n- Security Cleanup: Remove potentially sensitive UI configurations\n- Performance: Reduce payload size by removing unnecessary properties\n\n❌ Avoid These Mistakes:\n\n- Over-processing: Don't extract/transform business data in controller\n- Tight Coupling: Don't assume specific property names or structures\n- Inconsistent Responses: Don't create custom response formats\n- Mixed Responsibilities: Don't mix HTTP handling with complex business logic\n\n## 11. Testing Strategy\n\n**Test authentication (should show login page)**\n\ncurl /views/glimpse/test-id\n\n**Test with valid Notion page ID (after auth)**\n\ncurl -H \"Cookie: auth-cookie\" /views/glimpse/actual-notion-page-id\n\n**Verify button properties are filtered out**\n\nResponse should not contain any properties with \"type\": \"button\"\n\n## 12. Benefits of This Approach\n\n- Clean Data: Removes UI clutter from data API responses\n- Maintainable: Clear separation between layers with focused responsibilities\n- Flexible: Client can still extract any business data from Notion response\n- Consistent: Follows existing service response patterns\n- Secure: Prevents exposure of UI configurations\n- Performance: Smaller payloads without unnecessary UI properties\n- Future-proof: Easy to extend filtering logic for other UI property types\n\n## 13. When to Add Controller Processing\n\n✅ Good reasons to process in controller:\n\n- Remove UI-specific elements (buttons, formulas for display)\n- Filter sensitive configuration data\n- Remove properties that are never useful for data consumption\n- Basic security/privacy filtering\n\n❌ Avoid processing in controller:\n\n- Complex business logic transformations\n- Data extraction that depends on specific use cases\n- Heavy computational processing\n- Application-specific data formatting\n- This approach creates a clean, maintainable endpoint that provides useful data filtering while maintaining architectural best practices and keeping the controller focused on its core responsibilities.\n",[],[99,206],{"_104":214,"_95":215,"_152":216,"_154":153,"_155":138,"_156":217,"_158":22,"_106":218,"_100":32,"_161":174,"_163":219,"_164":22,"_165":-5,"_166":220,"_98":221},"b92643b4-724b-11f0-8ab1-0224a6c84d84","5-DUPLICATE-ROUTE.md","b9264486-724b-11f0-8ab1-0224a6c84d84",4,["D",1754433000279],"# Instructions for Adding Duplicate Routes (Multiple Paths to Same Handler)\n\nThis guide covers how to properly create multiple URL paths that serve the same functionality while maintaining clean architecture.\n\n## Use Case\n\nWhen you need both `/views/feature/:id` and `/feature/:id` to work identically, serving the same handler with the same authentication and behavior.\n\n## ❌ Common Mistakes to Avoid\n\n### 1. Direct Controller Import in Main Router\n\n```ts\n// DON'T DO THIS - violates architectural separation\nimport { featureHandler } from \"./backend/controllers/feature.controller.ts\";\napp.get(\"/feature/:id\", featureHandler);\n```\n\n### 2. Mounting Routes at Wrong Path\n\n```ts\n// DON'T DO THIS - creates /feature/feature/:id instead of /feature/:id\napp.route(\"/feature\", viewRoutes); // where viewRoutes has app.get(\"/feature/:id\", ...)\n```\n\n### 3. Forgetting Authentication Middleware\n\n```ts\n// DON'T DO THIS - inconsistent auth between routes\napp.use(\"/views/*\", authCheck);\n// Missing: app.use(\"/feature/*\", authCheck);\napp.route(\"/feature\", featureRoutes);\n```\n\n## ✅ Correct Implementation Steps\n\n### Step 1: Analyze Existing Route Structure\n\nFirst, understand the current route setup:\n\n```bash\n# Check existing routes file\ncat /backend/routes/views/_views.routes.ts\n\n# Check main router setup\ncat /main.tsx\n```\n\nLook for:\n\n- How the route is currently defined (e.g., `app.get(\"/feature/:id\", handler)`)\n- What authentication middleware is applied\n- How routes are mounted in main.tsx\n\n### Step 2: Create Dedicated Route Module\n\nCreate a new route module that mirrors the existing functionality:\n\n```ts\n// Create /backend/routes/feature/_feature.routes.ts\nimport { Hono } from \"npm:hono@3.12.12\";\nimport { featureHandler } from \"../../controllers/feature.controller.ts\";\n\nconst app = new Hono();\n\n// Use /:id (not /feature/:id) since it will be mounted at /feature\napp.get(\"/:id\", featureHandler);\n\nexport default app;\n```\n\n**Key Points:**\n\n- Route path is `/:id` not `/feature/:id` (mounting handles the prefix)\n- Import the same controller used by the original route\n- Follow the same naming convention (`_feature.routes.ts`)\n\n### Step 3: Add Route Documentation\n\n```ts\n// Create /backend/routes/feature/README.md\n# Feature Routes\n\nThis directory contains routes for the feature functionality.\n\n## Routes\n\n### GET /:id\n\n- **Purpose**: [Copy purpose from original route docs]\n- **Authentication**: Required (Google OAuth)\n- **Parameters**: `id` - [Parameter description]\n- **Response**: [Response description]\n\nThis is the same functionality as `/views/feature/:id` but mounted at `/feature/:id` for convenience.\n```\n\n### Step 4: Update Main Router\n\nAdd the new route module to main.tsx:\n\n```ts\n// Add import\nimport featureRoutes from \"./backend/routes/feature/_feature.routes.ts\";\n\n// Add authentication middleware (same as original)\napp.use(\"/feature/*\", authCheck);\n\n// Mount routes\napp.route(\"/feature\", featureRoutes);\n```\n\n**Critical Order:**\n\n1. Import route modules (not controllers)\n2. Apply authentication middleware\n3. Mount routes after middleware\n\n### Step 5: Verify Route Mounting Logic\n\nEnsure you understand the path composition:\n\n```\nMain router mount: app.route(\"/feature\", featureRoutes)\nRoute definition: app.get(\"/:id\", handler)\nFinal URL: /feature/:id ✅\n\nNOT:\nRoute definition: app.get(\"/feature/:id\", handler)\nFinal URL: /feature/feature/:id ❌\n```\n\n### Step 6: Test Both Routes\n\nTest that both routes work identically:\n\n```bash\n# Test original route\ncurl /views/feature/test-id\n\n# Test new route\ncurl /feature/test-id\n\n# Both should return identical responses (login page if not authenticated)\n```\n\n## Complete Example Implementation\n\n### File Structure\n\n```\nbackend/routes/\n├── views/_views.routes.ts          # Original route\n├── feature/\n│   ├── _feature.routes.ts          # New duplicate route\n│   └── README.md                   # Documentation\n```\n\n### main.tsx\n\n```ts\nimport { Hono } from \"npm:hono@3.12.12\";\nimport { lastlogin } from \"https://esm.town/v/stevekrouse/lastlogin_safe\";\n\n// Import route modules (NOT controllers)\nimport viewRoutes from \"./backend/routes/views/_views.routes.ts\";\nimport featureRoutes from \"./backend/routes/feature/_feature.routes.ts\";\nimport authCheck from \"./backend/routes/authCheck.ts\";\n\nconst app = new Hono();\n\n// Apply authentication to both routes\napp.use(\"/views/*\", authCheck);\napp.use(\"/feature/*\", authCheck);\n\n// Mount routes\napp.route(\"/views\", viewRoutes);\napp.route(\"/feature\", featureRoutes);\n\nexport default lastlogin(app.fetch);\n```\n\n### \\_feature.routes.ts\n\n```ts\nimport { Hono } from \"npm:hono@3.12.12\";\nimport { featureHandler } from \"../../controllers/feature.controller.ts\";\n\nconst app = new Hono();\n\napp.get(\"/:id\", featureHandler);\n\nexport default app;\n```\n\n## Architecture Principles\n\n### ✅ Maintain Clean Separation\n\n- Main router → Route modules → Controllers → Services\n- Never import controllers directly in main router\n- Each route module handles one logical grouping\n\n### ✅ Consistent Authentication\n\n- Apply same middleware to both route paths\n- Ensure identical security behavior\n- Document authentication requirements\n\n### ✅ DRY Principle\n\n- Reuse existing controllers and services\n- Don't duplicate business logic\n- Share the same handler implementation\n\n## Testing Checklist\n\n- [ ] Both routes return identical responses\n- [ ] Authentication works the same on both routes\n- [ ] No 404 errors on either route\n- [ ] Route parameters are correctly extracted\n- [ ] Error handling is consistent\n- [ ] Documentation is updated\n\n## Troubleshooting\n\n### Route Returns 404\n\n- Check route mounting path vs route definition path\n- Verify authentication middleware is applied before route mounting\n- Ensure route module exports default app\n\n### Different Behavior Between Routes\n\n- Verify both routes use the same controller\n- Check that authentication middleware is applied to both\n- Confirm route parameters are extracted identically\n\n### Architecture Violations\n\n- Never import controllers in main router\n- Always go through route modules\n- Maintain consistent file naming conventions\n\nThis approach ensures clean, maintainable code while providing the flexibility of multiple URL paths for the same functionality.\n",[],[99,215],{"_104":223,"_95":224,"_152":225,"_154":153,"_155":138,"_156":226,"_158":22,"_106":227,"_100":32,"_161":174,"_163":228,"_164":22,"_165":-5,"_166":229,"_98":230},"b933caac-724b-11f0-8c45-0224a6c84d84","6-URL.md","b933cb6a-724b-11f0-8c45-0224a6c84d84",6,["D",1754433000289],"# Instructions for Implementing a New /tasks/url Webhook Endpoint\n\n## Context\n\nThis guide is for implementing webhook endpoints in the Glance Demo Platform Val that follow the established architectural patterns.\n\n## Pre-Implementation Analysis\n\n1. ### Understand the Architecture Patterns\n   Before implementing, identify which pattern to use:\n\n- Data API Pattern (/api/_, /views/_): Controllers return data objects, routes handle HTTP\n- Webhook Handler Pattern (/tasks/\\*): Controllers handle HTTP requests/responses directly\n\nFor /tasks/\\* routes, use the Webhook Handler Pattern.\n\n2. ### Examine Existing Patterns\n   Study these files to understand the established patterns:\n\n- `/backend/controllers/glimpse.controller.ts` - Example of webhook handler pattern\n- `/backend/routes/tasks/_tasks.routes.ts` - Existing webhook route structure\n- `/backend/services/notion.service.ts` - Service layer patterns\n- `/backend/routes/webhookAuthCheck.ts` - Authentication middleware\n\n3. ### Identify Required Components\n   For a new /tasks/url endpoint, you'll need:\n\n- Controller function (handles HTTP directly)\n- Service function (if new Notion API calls needed)\n- Route definition\n- Documentation updates\n\n## Implementation Steps\n\n### Step 1: Extend the Service Layer (if needed)\n\nIf new external API calls are required:\n\n1. **Location:** /backend/services/notion.service.ts\n1. **Pattern:** Add pure API functions that return {success, data/error, timestamp} format\n1. **Example:** updatePageUrl(pageId, url) function\n1. **Responsibilities:** Only handle external API calls, no business logic\n\n### Step 2: Create the Controller\n\n1. **Location:** `/backend/controllers/tasks.controller.ts`\n1. **Pattern:** Webhook Handler Pattern - function takes Context, returns HTTP responses\n1. **Function signature:** export async function handleNotionWebhook(c: Context)\n1. **Responsibilities:**\n\n- Parse HTTP request (c.req.json(), c.req.header())\n- Extract and validate data from webhook payload\n- Implement business logic\n- Call service functions\n- Log success/failure with detailed context\n- Return HTTP responses with appropriate status codes (c.json(data, statusCode))\n\n### Step 3: Add the Route\n\n- **Location:** `/backend/routes/tasks/_tasks.routes.ts`\n- **Pattern:** Direct controller call\n- **Implementation:** `app.post(\"/url\", handleNotionWebhook)`\n- **Update catch-all handler:** Add new endpoint to `availableEndpoints` array\n\n### Step 4: Update Documentation\n\n**Main README** `(/README.md)`:\n\n- Add endpoint to \"Webhooks (Notion Integration)\" section\n- Follow format: `POST /tasks/url` - Description (requires `X-API-KEY` header)\n\n**Route README** `(/backend/routes/tasks/README.md)`:\n\n- Add comprehensive endpoint documentation\n- Include request/response examples\n- Document error cases\n- Add testing instructions\n\n**Controller README** `(/backend/controllers/README.md)`:\n\n- Add controller function to examples\n- Note that it follows webhook handler pattern\n\n**Service README** `(/backend/services/README.md)`:\n\n- Add any new service functions to examples\n\n## Key Implementation Details\n\n### Authentication\n\n- All `/tasks/*` routes automatically use webhook authentication\n- Requires X-API-KEY header with NOTION_WEBHOOK_SECRET value\n- No additional auth setup needed in route\n\n### Webhook Payload Handling\n\nSupport multiple payload structures:\n\n```\n// Try multiple common webhook payload structures\nif (body.data?.id) {\n  pageId = body.data.id;\n} else if (body.id) {\n  pageId = body.id;\n} else if (body.page_id) {\n  pageId = body.page_id;\n}\n```\n\n### URL Construction Pattern\n\nUse this pattern for glimpse URLs:\n\n```\nconst host = c.req.header(\"host\");\nconst glimpseUrl = `https://${host}/glimpse/${pageId}`;\n```\n\n### Error Handling\n\nReturn structured errors with appropriate HTTP status codes:\n\n```\n// 400 for client errors\nreturn c.json({ success: false, error: \"Description\" }, 400);\n\n// 500 for server errors\nreturn c.json({ success: false, error: \"Description\", details: result.error }, 500);\n```\n\n### Logging Pattern\n\nInclude comprehensive logging:\n\n```\nconsole.log(\"Processing URL update webhook request\");\nconsole.log(\"Notion webhook received:\", body);\nconsole.log(`Constructed glimpse URL: ${glimpseUrl} for page ID: ${pageId}`);\nconsole.log(\"Successfully updated Notion page with glimpse URL:\", { pageId, url });\nconsole.error(\"Failed to update Notion page:\", result.error);\n```\n\n### Success Response Format\n\nReturn detailed success responses:\n\n```\nreturn c.json({\n  success: true,\n  message: \"Page URL updated successfully\",\n  pageId: pageId,\n  url: glimpseUrl,\n  timestamp: new Date().toISOString()\n});\n```\n\n## Testing Strategy\n\n### Authentication Testing\n\n1. Test without header (expect 401)\n1. Test with wrong key (expect 403)\n1. Test with correct key (expect 200 or business logic response)\n\n### Business Logic Testing\n\n1. Test with valid payload structure\n1. Test with missing page ID (expect 400)\n1. Test with missing host header (expect 400)\n1. Test with Notion API failures (expect 500)\n\n### Add Test Endpoint (optional)\n\nCreate a test endpoint that simulates the logic without calling external APIs:\n\n```\napp.post(\"/test-url\", async (c) => {\n  // Same logic but return test response instead of calling Notion API\n});\n```\n\n## Common Pitfalls to Avoid\n\n1. Don't mix patterns: /tasks/\\_ routes should use webhook handler pattern, not data API pattern\n1. Don't forget authentication: All /tasks/\\_ routes are automatically protected\n1. Don't skip logging: Webhook endpoints need comprehensive logging for debugging\n1. Don't forget documentation: Update all relevant README files\n1. Don't hardcode hosts: Always extract host from request headers\n1. Don't forget error cases: Handle missing data, API failures, etc.\n1. Don't skip the catch-all update: Add new endpoints to available endpoints list\n\n## Validation Checklist\n\nBefore considering implementation complete:\n\n- Controller follows webhook handler pattern (takes Context, returns HTTP responses)\n- Route uses direct controller call pattern\n- Service functions return consistent {success, data/error, timestamp} format\n- Comprehensive logging for success and failure cases\n- Proper HTTP status codes (400 for client errors, 500 for server errors)\n- Support for multiple webhook payload structures\n- Host extraction from request headers\n- Updated all relevant documentation\n- Added endpoint to catch-all handler's available endpoints list\n- Tested authentication (should fail with test keys)\n- Error handling for all edge cases\n\n## Final Notes\n\n- The webhook authentication middleware handles all security automatically\n- Focus on business logic and proper HTTP handling in the controller\n- Keep service functions pure (no business logic, just API calls)\n- Document the architectural decision when mixing patterns\n- Test thoroughly but remember authentication will block test requests without proper keys\n\nThis pattern ensures consistency with the established architecture while providing clear separation of concerns and comprehensive error handling.\n",[],[99,224],{"_104":232,"_95":233,"_152":234,"_154":153,"_155":138,"_156":235,"_158":22,"_106":236,"_100":32,"_161":174,"_163":237,"_164":22,"_165":-5,"_166":238,"_98":239},"b942a536-724b-11f0-88f3-0224a6c84d84","9-REACT.md","b942a61c-724b-11f0-88f3-0224a6c84d84",9,["D",1754433000465],"# Complete Implementation Instructions: React Bootstrap for Glimpse Endpoint (REVISED)\n\n\\=================================================================================\n\n## Objective\n\n---\n\nTransform an existing JSON-only `/glimpse/:id` endpoint to serve a professional HTML page with React, while maintaining JSON API compatibility.\n\n## Prerequisites\n\n---\n\n- Existing `/glimpse/:id` endpoint that returns JSON data\n- Hono-based backend with authentication middleware\n- User email available via `c.get(\"userEmail\")` from auth context\n- LastLogin authentication system with `/auth/logout` endpoint\n\n## Implementation Steps\n\n---\n\n### 1\\. Create Frontend Directory Structure\n\n    /frontend/\n    ├── glimpse.html\n    ├── glimpse.tsx\n    ├── components/\n    │   └── GlimpseView.tsx\n    └── README.md (update existing)\n\n### 2\\. Create `/frontend/glimpse.html`\n\nClean HTML shell that loads the React entry point:\n\n    \n    \n    \n        \n        \n        Glimpse\n        \n        \n    \n    \n        
\n        \n    \n    \n\n### 3\\. Create `/frontend/glimpse.tsx`\n\nReact entry point that bootstraps the application:\n\n    /** @jsxImportSource https://esm.sh/react@18.2.0 */\n    import React from \"https://esm.sh/react@18.2.0?deps=react@18.2.0\";\n    import { createRoot } from \"https://esm.sh/react-dom@18.2.0/client?deps=react@18.2.0,react-dom@18.2.0\";\n    import { GlimpseView } from \"./components/GlimpseView.tsx\";\n\n    // Get data injected by the server\n    const data = (window as any).__INITIAL_DATA__;\n    const userEmail = (window as any).__USER_EMAIL__;\n\n    // Render the application\n    const root = createRoot(document.getElementById('root')!);\n    root.render();\n\n### 4\\. Create `/frontend/components/GlimpseView.tsx`\n\nPure React component for displaying glimpse data:\n\n    /** @jsxImportSource https://esm.sh/react@18.2.0 */\n    import React from \"https://esm.sh/react@18.2.0?deps=react@18.2.0\";\n\n    interface GlimpseViewProps {\n      data: any;\n      userEmail?: string;\n    }\n\n    export function GlimpseView({ data, userEmail }: GlimpseViewProps) {\n      return (\n        \n          {/* Header */}\n          \n            Glimpse
\n            \n              {userEmail || 'user@example.com'}\n              \n                Logout\n              \n            
\n          
\n\n          {/* Main layout with sidenav and content */}\n          \n            {/* Sidenav */}\n            \n              Navigation
\n              \n                \n                  \n                    Dashboard\n                  \n                
\n                \n                  \n                    Current Glimpse\n                  \n                
\n              
\n            
\n\n            {/* Main content */}\n            \n              \n                Glimpse Data
\n                \n                  {JSON.stringify(data, null, 2)}\n                
\n              
\n            
\n          
\n\n          {/* Footer */}\n          \n            © 2024 Glimpse Platform
\n          
\n        
\n      );\n    }\n\n### 5\\. Update `/frontend/README.md`\n\nReplace existing content with:\n\n    # Frontend\n\n    Client-side files that render in the browser.\n\n    ## Structure\n\n    - `glimpse.html` - Clean HTML shell that loads React entry point\n    - `glimpse.tsx` - React bootstrap/entry point that gathers data and initializes the app\n    - `components/` - React components\n      - `GlimpseView.tsx` - Component for displaying JSON data in glimpse pages\n\n    ## Glimpse Pages\n\n    The glimpse functionality uses a 3-layer architecture:\n\n    1. **HTML Shell** (`glimpse.html`) - Minimal HTML that loads the React entry point\n    2. **React Bootstrap** (`glimpse.tsx`) - Gathers server-injected data and renders the main component\n    3. **UI Component** (`GlimpseView.tsx`) - Pure React component that receives data as props\n\n    ### Data Flow\n\n    1. Backend fetches cached or live Notion data\n    2. Data is injected into HTML template as `window.__INITIAL_DATA__`\n    3. React entry point reads the data and passes it to the component\n    4. Component renders the data in a `` tag for JSON display\n\n    ## API Compatibility\n\n    The glimpse endpoint maintains backward compatibility:\n    - Default: Serves HTML page with React\n    - `?format=json` or `Accept: application/json` header: Returns JSON data\n\n    ## Future Enhancements\n\n    When ready to format Notion data as HTML instead of JSON:\n    1. Modify the `GlimpseView` component in `components/GlimpseView.tsx`\n    2. Add proper Notion block rendering logic\n    3. The entry point (`glimpse.tsx`) handles data gathering, so UI changes only affect the component\n\n### 6\\. Modify Glimpse Controller\n\nIn `/backend/controllers/glimpse.controller.ts`:\n\n**Add imports:**\n\n    import { readFile, serveFile } from \"https://esm.town/v/std/utils@85-main/index.ts\";\n\n**Replace the entire `glimpseHandler` function:**\n\n    export async function glimpseHandler(c: Context) {\n      const id = c.req.param(\"id\");\n\n      if (!id) {\n        return c.json({ error: \"Demo ID is required\" }, 400);\n      }\n\n      // Get the data (cached or live)\n      let notionData;\n\n      // First try to get cached data\n      try {\n        const cachedData = await blob.getJSON(blobKeyForDemos(id));\n        if (cachedData) {\n          console.log(`Serving cached data for glimpse ID: ${id}`);\n          notionData = cachedData;\n        }\n      } catch (error) {\n        console.log(`No cached data found for glimpse ID: ${id}, falling back to live data`);\n      }\n\n      // Cache miss - fall back to live Notion data\n      if (!notionData) {\n        const result = await getGlimpseData(id);\n\n        if (!result.success) {\n          return c.json({ error: result.error, details: result.details }, result.status);\n        }\n\n        notionData = result.data;\n      }\n\n      // Check if they want JSON (for API compatibility)\n      if (c.req.header(\"accept\")?.includes(\"application/json\") || c.req.query(\"format\") === \"json\") {\n        return c.json(notionData);\n      }\n\n      // Otherwise serve the React page\n      let html = await readFile(\"/frontend/glimpse.html\", import.meta.url);\n\n      // Get user email from auth context\n      const userEmail = c.get(\"userEmail\");\n\n      const dataScript = ``;\n\n      html = html.replace(\"\", `${dataScript}`);\n      return c.html(html);\n    }\n\n### 7\\. Add Frontend File Serving\n\nIn your main Hono app (likely `/main.tsx` or similar), add frontend file serving:\n\n**Add after existing route mounts:**\n\n    // Serve frontend files\n    app.get(\"/frontend/*\", c => serveFile(c.req.path, import.meta.url));\n\n## Key Features Delivered\n\n---\n\n✅ **Clean Architecture** \\- Proper separation between HTML shell, React bootstrap, and UI components  \n✅ **Professional Tailwind Layout** \\- Header, sidenav, main content, footer  \n✅ **Server-side Data Injection** \\- No extra API calls needed  \n✅ **User Context** \\- Shows authenticated user's email in header  \n✅ **Backward Compatibility** \\- JSON API still works with `?format=json`  \n✅ **Proper Authentication Integration** \\- Uses `/auth/logout` endpoint  \n✅ **Clean JSON Display** \\- Formatted in scrollable `` tag  \n✅ **Minimal Tailwind Classes** \\- Only essential styling  \n✅ **React 18.2.0** \\- Properly configured with pinned versions  \n✅ **Error Handling** \\- Includes Val Town's error capture script  \n✅ **Maintainable Code** \\- Single source of truth for UI logic\n\n## Testing\n\n---\n\n- Visit `/glimpse/:id` → Should show HTML page with layout\n- Visit `/glimpse/:id?format=json` → Should return JSON data\n- Verify user email appears in header\n- Verify logout link works\n- Verify React entry point loads correctly\n\nThis implementation provides a clean, maintainable React architecture while maintaining all existing functionality and adding a professional UI layer.\n",[],[99,233],[99],{"_104":242,"_95":243,"_152":244,"_154":-5,"_155":138,"_156":245,"_158":159,"_106":246,"_100":32,"_161":247,"_163":72,"_164":22,"_165":-5,"_166":248,"_98":249},"12e1f598-723c-11f0-9e42-0224a6c84d84","main.tsx","12e1f62e-723c-11f0-9e42-0224a6c84d84",1,["D",1754426278882],"script",[],[243],"files",[150,168,178,187,195,204,213,222,231,241],"counts",{"_254":32,"_255":157,"_256":172,"_257":32},"pulls","branches","forks","envVars","contents",[260,263,266,269,272,275,278,281],{"_104":169,"_95":170,"_152":171,"_154":153,"_155":138,"_156":172,"_158":22,"_106":261,"_100":32,"_161":174,"_163":175,"_164":22,"_165":-5,"_98":262},["D",1754433000236],[99,170],{"_104":179,"_95":180,"_152":181,"_154":153,"_155":138,"_156":182,"_158":22,"_106":264,"_100":32,"_161":174,"_163":184,"_164":22,"_165":-5,"_98":265},["D",1754433000403],[99,180],{"_104":188,"_95":189,"_152":190,"_154":153,"_155":138,"_156":101,"_158":22,"_106":267,"_100":32,"_161":174,"_163":192,"_164":22,"_165":-5,"_98":268},["D",1754433000342],[99,189],{"_104":196,"_95":197,"_152":198,"_154":153,"_155":138,"_156":199,"_158":22,"_106":270,"_100":32,"_161":174,"_163":201,"_164":22,"_165":-5,"_98":271},["D",1754433000299],[99,197],{"_104":205,"_95":206,"_152":207,"_154":153,"_155":138,"_156":208,"_158":22,"_106":273,"_100":32,"_161":174,"_163":210,"_164":22,"_165":-5,"_98":274},["D",1754433000438],[99,206],{"_104":214,"_95":215,"_152":216,"_154":153,"_155":138,"_156":217,"_158":22,"_106":276,"_100":32,"_161":174,"_163":219,"_164":22,"_165":-5,"_98":277},["D",1754433000279],[99,215],{"_104":223,"_95":224,"_152":225,"_154":153,"_155":138,"_156":226,"_158":22,"_106":279,"_100":32,"_161":174,"_163":228,"_164":22,"_165":-5,"_98":280},["D",1754433000289],[99,224],{"_104":232,"_95":233,"_152":234,"_154":153,"_155":138,"_156":235,"_158":22,"_106":282,"_100":32,"_161":174,"_163":237,"_164":22,"_165":-5,"_98":283},["D",1754433000465],[99,233],{"_104":151,"_95":99,"_152":153,"_154":-5,"_155":138,"_156":157,"_158":159,"_106":285,"_100":32,"_161":162,"_163":-5,"_164":22,"_165":-5,"_98":286},["D",1754433000128],[99],"upstreamProject","upstreamBranch","emptyEnvVars","isNew","flags",[],"routes/_app.x.$handle.$name.branch.$branch.version.$version.code.$",{"_93":94,"_95":96,"_97":43,"_100":101,"_98":99,"_102":295,"_148":300,"_250":331,"_174":332,"_258":335,"_352":-5,"_353":22,"_354":-5,"_355":-5,"_356":-5,"_357":358},{"_104":105,"_95":96,"_106":296,"_108":-5,"_109":22,"_110":111,"_112":-5,"_113":-5,"_14":114,"_115":-5,"_116":22,"_117":-5,"_118":32,"_16":119,"_120":121,"_122":121,"_123":124,"_125":124,"_126":124,"_127":121,"_128":121,"_23":297,"_132":298,"_135":299,"_147":22},["D",1754426278868],{"_93":94,"_130":131},{"_93":94,"_134":131},{"_100":137,"_95":43,"_104":138,"_139":105,"_140":-5,"_141":-5,"_142":-5,"_143":-5,"_144":-5,"_145":96,"_146":94},[301,328],{"_104":151,"_95":99,"_152":153,"_154":-5,"_155":138,"_156":157,"_158":159,"_106":160,"_100":32,"_161":162,"_163":-5,"_164":22,"_165":-5,"_166":302,"_98":327},[303,306,309,312,315,318,321,324],{"_104":169,"_95":170,"_152":171,"_154":153,"_155":138,"_156":172,"_158":22,"_106":173,"_100":32,"_161":174,"_163":175,"_164":22,"_165":-5,"_166":304,"_98":305},[],[99,170],{"_104":179,"_95":180,"_152":181,"_154":153,"_155":138,"_156":182,"_158":22,"_106":183,"_100":32,"_161":174,"_163":184,"_164":22,"_165":-5,"_166":307,"_98":308},[],[99,180],{"_104":188,"_95":189,"_152":190,"_154":153,"_155":138,"_156":101,"_158":22,"_106":191,"_100":32,"_161":174,"_163":192,"_164":22,"_165":-5,"_166":310,"_98":311},[],[99,189],{"_104":196,"_95":197,"_152":198,"_154":153,"_155":138,"_156":199,"_158":22,"_106":200,"_100":32,"_161":174,"_163":201,"_164":22,"_165":-5,"_166":313,"_98":314},[],[99,197],{"_104":205,"_95":206,"_152":207,"_154":153,"_155":138,"_156":208,"_158":22,"_106":209,"_100":32,"_161":174,"_163":210,"_164":22,"_165":-5,"_166":316,"_98":317},[],[99,206],{"_104":214,"_95":215,"_152":216,"_154":153,"_155":138,"_156":217,"_158":22,"_106":218,"_100":32,"_161":174,"_163":219,"_164":22,"_165":-5,"_166":319,"_98":320},[],[99,215],{"_104":223,"_95":224,"_152":225,"_154":153,"_155":138,"_156":226,"_158":22,"_106":227,"_100":32,"_161":174,"_163":228,"_164":22,"_165":-5,"_166":322,"_98":323},[],[99,224],{"_104":232,"_95":233,"_152":234,"_154":153,"_155":138,"_156":235,"_158":22,"_106":236,"_100":32,"_161":174,"_163":237,"_164":22,"_165":-5,"_166":325,"_98":326},[],[99,233],[99],{"_104":242,"_95":243,"_152":244,"_154":-5,"_155":138,"_156":245,"_158":159,"_106":246,"_100":32,"_161":247,"_163":72,"_164":22,"_165":-5,"_166":329,"_98":330},[],[243],[301,303,306,309,312,315,318,321,324,328],{"_104":151,"_155":138,"_152":153,"_95":99,"_163":-5,"_161":162,"_100":32,"_154":-5,"_106":333,"_156":157,"_165":-5,"_98":334},["D",1754433000128],[99],[336,338,340,342,344,346,348,350],{"_104":169,"_95":170,"_152":171,"_154":153,"_155":138,"_156":172,"_158":22,"_106":261,"_100":32,"_161":174,"_163":175,"_164":22,"_165":-5,"_98":337},[99,170],{"_104":179,"_95":180,"_152":181,"_154":153,"_155":138,"_156":182,"_158":22,"_106":264,"_100":32,"_161":174,"_163":184,"_164":22,"_165":-5,"_98":339},[99,180],{"_104":188,"_95":189,"_152":190,"_154":153,"_155":138,"_156":101,"_158":22,"_106":267,"_100":32,"_161":174,"_163":192,"_164":22,"_165":-5,"_98":341},[99,189],{"_104":196,"_95":197,"_152":198,"_154":153,"_155":138,"_156":199,"_158":22,"_106":270,"_100":32,"_161":174,"_163":201,"_164":22,"_165":-5,"_98":343},[99,197],{"_104":205,"_95":206,"_152":207,"_154":153,"_155":138,"_156":208,"_158":22,"_106":273,"_100":32,"_161":174,"_163":210,"_164":22,"_165":-5,"_98":345},[99,206],{"_104":214,"_95":215,"_152":216,"_154":153,"_155":138,"_156":217,"_158":22,"_106":276,"_100":32,"_161":174,"_163":219,"_164":22,"_165":-5,"_98":347},[99,215],{"_104":223,"_95":224,"_152":225,"_154":153,"_155":138,"_156":226,"_158":22,"_106":279,"_100":32,"_161":174,"_163":228,"_164":22,"_165":-5,"_98":349},[99,224],{"_104":232,"_95":233,"_152":234,"_154":153,"_155":138,"_156":235,"_158":22,"_106":282,"_100":32,"_161":174,"_163":237,"_164":22,"_165":-5,"_98":351},[99,233],"upstream","showCompareCallout","pull","ahead","behind","templates",[],"actionData","errors"]