Stay tuned...

`);\n});\n```\n\n## Architecture Validation\n\nBefore proceeding, verify your implementation follows the architecture:\n\n- Services only make direct API calls (no environment variables, no orchestration)\n- Controllers handle business logic and coordinate services\n- Routes only handle HTTP concerns and call controllers\n- No service calls directly from routes\n- Environment variables handled in controllers, not services\n- Consistent response patterns across all layers\n\n### Expected Behavior\n\n**Important**: for the health endpoint JSON below, get the project name from the `yaml` code block in `/_townie/00-setup.md`; it is the value of the `project` key in the `yaml` code.\n\nThe health endpoint should return:\n\n```\n{\n \"status\": \"ok\",\n \"timestamp\": \"2025-07-14T18:26:28.270Z\",\n \"val\": {{project}},\n \"databases\": {\n \"configured\": true,\n \"{{db1}}\": \"connected\",\n // other databases\n }\n}\n```\n\nThis architecture is intended to create clear separation of concerns and should make the codebase maintainable and testable.\n\n---\n\n**Townie, stop here! Before proceeding to additional steps, confirm that this step is working correctly.**\n\n**If there was an error regarding environment variables**: remind the user to upload `vars.env` to the Environment Variables section of this Val, and to then let you know when that step is complete so you can retry.\n\n**If everything is working as intended**: conclude this step with these messages:\n\n1. Briefly summarize the work you just did and why it's important\n1. Provide the URL to the health endpoint so the user can see that the endpoint is live. (Tell the user that they can copy and paste that URL into a new tab to see it live.)\n\n---\n\n### Next step: web route authentication\n\nTell the user that the next step is to add authentication to the web routes of this Val, and that they should copy this line and paste it into Townie:\n\n> Add auth to this Val with what you see in `/_townie/02-auth.md`\n",[],[152,182],{"_102":191,"_95":192,"_153":193,"_155":154,"_156":138,"_157":194,"_159":160,"_104":195,"_99":196,"_162":176,"_164":197,"_165":22,"_166":-5,"_167":198,"_98":199},"e335bef4-7931-11f0-8b59-0224a6c84d84","02-auth.md","c6f2254a-7911-11f0-a82d-0224a6c84d84",149,["D",1755191562037],4,"# Complete Authentication Implementation Instructions\n\n## Townie instructions (Townie should follow these)\n\nRead through all of these instructions in order to understand the architecture of this Val, and implementation details important to this Val, and then once you have it all in your memory you should get to work.\n\nIf anything is unclear, you should stop and ask me for clarification before proceeding. Do not write code if you are unsure of what is expected.\n\n**Important:** there are checkpoints in these instructions where you are directed to stop and ask permission before proceeding. Follow those instructions and do not proceed without permission.\n\n## LastLogin Built-in Features\n\n**Important:** LastLogin automatically handles certain routes and authentication flows:\n\n- **`/auth/logout`** - LastLogin intercepts this route and handles logout automatically\n- **No custom logout route needed** in your Hono app\n- **Simply link to `/auth/logout`** and LastLogin will clear the session and redirect\n- **Authentication headers** - LastLogin adds `X-LastLogin-Email` header for authenticated requests\n\n**Authentication Flow:**\n\n1. **Unauthenticated requests** → LastLogin checks for session\n2. **No session** → Returns 401 or redirects to login\n3. **Valid session** → Adds `X-LastLogin-Email` header and passes to your app\n4. **`/auth/logout` requests** → LastLogin clears session automatically (never reaches your app)\n\n## Step 1. Core Architecture Setup\n\n### Main Application (main.tsx)\n\n**Add global authentication middleware to `main.tsx`:**\n\n```typescript\nimport { lastlogin } from \"https://esm.town/v/stevekrouse/lastlogin_safe\";\n\n// Import route modules\nimport authCheck from \"./backend/routes/authCheck.ts\";\n// other route modules\n\nconst app = new Hono();\n\n// Apply global authentication middleware to ALL routes\napp.use(\"*\", authCheck);\n\n// other routes\n\n// Export with LastLogin wrapper\nasync function handler(request: Request): Promise {\n return app.fetch(request);\n}\n\n// Wrap and export the main HTTP handler with lastlogin\nexport default lastlogin(handler);\n```\n\n### Dashboard Route Organization\n\n**Best Practice: Separate the root dashboard route from main.tsx**\n\nInstead of defining the root route directly in `main.tsx`, create a dedicated dashboard route file:\n\n- **Create**: `/backend/routes/views/dashboard.tsx`\n- **Purpose**: Handle the authenticated user's main dashboard/landing page\n- `import dashboardRoute from \"./backend/routes/views/dashboard.tsx\";`\n- **Mount in main.tsx**: `app.get(\"/\", dashboardRoute)`\n- **Note**: Dashboard is placed in `/routes/views/` because it's a user-facing view, not an API endpoint\n\nThis approach:\n\n- Keeps `main.tsx` focused on app setup and middleware\n- Makes the dashboard logic easier to maintain and test\n- Follows the modular architecture pattern with views separated from API routes\n- Places user-facing interfaces in `/routes/views/` for better organization\n- Allows for easier dashboard enhancements without touching core routing\n\nThe dashboard route should:\n\n- Display user information (email from `c.get(\"userEmail\")`)\n- Display the `/api/health` endpoint results as raw JSON in a

 tag; e.g., JSON.stringify(data, null, 2)\n- Include a link to the raw `/api/health` endpoint below the JSON display for easy access and testing\n- Include logout functionality via `/auth/logout`\n- Show a simple and professional welcome interface with minimal styling\n\n### URL Utility for Absolute URLs\n\n**Create `/backend/utils/url.ts`:**\n\nBefore implementing the dashboard, create a utility function for constructing absolute URLs when needed (like for sharing URLs externally):\n\n```typescript\nexport function getAbsoluteUrl(c: any, path: string): string {\n  const protocol = c.req.header(\"x-forwarded-proto\") || \"https\";\n  const host = c.req.header(\"host\");\n  return `${protocol}://${host}${path}`;\n}\n```\n\n**Usage in dashboard and other routes:**\n\n- Import: `import { getAbsoluteUrl } from \"../../utils/url.ts\";`\n- Use for external sharing: `const dashboardUrl = getAbsoluteUrl(c, '/');`\n- Continue using relative URLs for internal links: `href=\"/api/health\"`\n\n**When to use absolute vs relative URLs:**\n\n- **Absolute URLs**: External sharing, webhooks, emails, API documentation\n- **Relative URLs**: Internal navigation, forms, API calls within the app\n\n### Create `/backend/routes/authCheck.ts`\n\n**Authentication Middleware:**\n\n- Retrieve the user's email: `const email = c.req.header(\"X-LastLogin-Email\")`\n- If email exists, the user is authenticated - store in context and continue to your app\n- If no email, show login page with LoginWithGoogleButton\n- **Note:** You don't need to handle `/auth/logout` - LastLogin does this automatically\n\n**Login Page Requirements:**\n\n- `import { LoginWithGoogleButton } from \"https://esm.town/v/stevekrouse/LoginWithGoogleButton\"`\n- Use the `` React Component, optionally supplying the `text` attribute\n- Add \"via LastLogin\" underneath LoginWithGoogleButton, centered, secondary text, linking to https://lastlogin.io/\n- Pass the email from the server to the client-side code if using React hydration or similar techniques\n\n**For authenticated users:**\n\n- Store email in context: `c.set('userEmail', email)`\n- In your authenticated views, add logout functionality: `Logout`\n\n**Public Routes Whitelist:**\n\n- Add a `PUBLIC_ROUTES` array at the top for routes that should be accessible without authentication\n- **Don't include `/auth/logout`** in the whitelist (LastLogin handles it before your middleware runs)\n- Use for truly public routes like: `/demo/:id`, `/api/health`, static assets, etc.\n\nIf you encounter problems loading the React button, try this simple approach for authCheck.ts:\n\n```typescript\n// Public routes that don't require authentication\nconst PUBLIC_ROUTES = [\n  // Add public routes here as needed\n  // '/demo/:id',  // Example: public demo viewing\n  // '/api/public', // Example: public API endpoints\n];\n\n// Helper function to check if a route is public\nfunction isPublicRoute(path: string): boolean {\n  return PUBLIC_ROUTES.some((route) => {\n    // Handle exact matches\n    if (route === path) return true;\n\n    // Handle wildcard patterns (basic implementation)\n    if (route.includes(\"*\")) {\n      const pattern = route.replace(\"*\", \".*\");\n      return new RegExp(`^${pattern}$`).test(path);\n    }\n\n    // Handle route parameters (basic implementation)\n    if (route.includes(\":\")) {\n      const pattern = route.replace(/:[^/]+/g, \"[^/]+\");\n      return new RegExp(`^${pattern}$`).test(path);\n    }\n\n    return false;\n  });\n}\n\nexport default async (c, next) => {\n  // Allow public routes to bypass authentication\n  if (isPublicRoute(c.req.path)) {\n    await next();\n    return;\n  }\n\n  const email = c.req.header(\"X-LastLogin-Email\");\n\n  if (!email) {\n    // Show login page if not authenticated\n    return c.html(`\n      \n      \n      \n        Your App - Login Required\n      \n      \n        \n          Sign in
\n          Sign in to access your app.
\n          \n            Loading login button...
\n          
\n          \n            via LastLogin\n          
\n        
\n\n        \n      \n      \n    `);\n  }\n\n  // If authenticated, store email in context for use by routes\n  c.set(\"userEmail\", email);\n\n  // Continue to the next middleware/route\n  await next();\n};\n```\n\n## Common Gotchas\n\n**Logout Route:**\n\n- ❌ Don't create a custom `/auth/logout` route in your Hono app\n- ✅ Just link to `/auth/logout` - LastLogin handles it automatically\n- The logout link will work for authenticated users without any custom code\n- LastLogin intercepts `/auth/logout` at the wrapper level before it reaches your middleware\n\n**Public Routes:**\n\n- Use the whitelist in authCheck.ts for routes that should be accessible without authentication\n- `/auth/logout` doesn't need to be whitelisted (LastLogin handles it before your middleware runs)\n- Examples of routes that should be whitelisted: public demos, health checks, static assets\n\n**Authentication Headers:**\n\n- Authenticated requests will have `X-LastLogin-Email` header\n- Unauthenticated requests will not have this header\n- LastLogin wrapper handles session validation before your code runs\n\n**Error Handling:**\n\n- If LastLogin can't validate a session, it returns 401 before reaching your app\n- Your authCheck middleware only runs for requests that pass LastLogin's validation\n- No need to handle session expiration - LastLogin manages this\n\n---\n\n**Townie, stop here! Before proceeding to additional steps, confirm that this step is working correctly.**\n\n**If everything is working as intended**: conclude this step with these messages:\n\n1. Briefly summarize the work that was just completed and why it's important\n1. Use the getAbsoluteUrl utility to construct the dashboard URL and provide it to the user so they can see that the dashboard is live. Tell the user that they can copy and paste that URL into a new tab to see it live.\n1. Tell the user that they can log into the dashboard using their Google email address.\n\n---\n\n### Next step: webhook authentication\n\nTell the user that the next step is to add webhook authentication to this Val. Explain what webhooks are why it's important to authenticate them.\n\nLastly, tell the user to copy this line and paste it into Townie:\n\n> Add webhook auth to this Val with what you see in `/_townie/03-webhooks.md`\n",[],[152,192],{"_102":201,"_95":202,"_153":203,"_155":154,"_156":138,"_157":204,"_159":160,"_104":205,"_99":206,"_162":176,"_164":207,"_165":22,"_166":-5,"_167":208,"_98":209},"e32bc714-7931-11f0-9752-0224a6c84d84","03-webhooks.md","c6ec58fe-7911-11f0-b9ae-0224a6c84d84",147,["D",1755191562004],3,"# Webhook Authentication Architecture Instructions\n\n## Townie instructions (Townie should follow these)\n\n## Middleware Order\n\nPlace authentication middleware in the following order:\n\n1. **Notion webhook auth middleware** (X-API-KEY for `/tasks/*`)\n2. **Global user auth middleware** (for other protected routes)\n3. **Route handlers**\n\n## Webhook Authentication\n\n### Scope\n\n- Apply only to routes under /tasks/\\*\n- All /tasks endpoints expect POSTs from Notion webhooks\n\n### Implementation\n\n- Create `/backend/routes/webhookAuthCheck.ts`\n- Extract X-API-KEY header from incoming requests\n- Compare against NOTION_WEBHOOK_SECRET environment variable\n- Use constant-time comparison to prevent timing attacks\n- Return 401/403 for authentication failures with generic error messages\n- Log failed authentication attempts for monitoring\n\n### Route Implementation Requirements\n\n**CRITICAL:** All webhook routes MUST use POST method:\n\n```\n// ✅ CORRECT - Webhooks are POST requests\napp.post(\"/webhook-endpoint\", async (c) => {\n  // Handle webhook\n});\n\n// ❌ WRONG - This won't work with webhooks\napp.get(\"/webhook-endpoint\", async (c) => {\n  // Webhooks can't reach this\n});\n```\n\nWhy: Notion (and most webhook providers) send POST requests, never GET.\n\n### Middleware Application (EXACT CODE)\n\nApply middleware in this EXACT order in main.tsx:\n\n```\n// 1. Webhook auth - ONLY for /tasks/* routes\napp.use(\"/tasks/*\", webhookAuth);\n\n// 2. User auth - for ALL routes EXCEPT /tasks/*\napp.use(\"/api/*\", authCheck);\napp.use(\"/views/*\", authCheck);\napp.use(\"/\", authCheck);\n\n// Add root route - now serves the authenticated dashboard\napp.get(\"/\", dashboardRoute);\n\n// 3. Mount routes AFTER middleware\napp.route(\"/tasks\", taskRoutes);\n```\n\n**Important:** We've changed the global authentication from app.use(\"\\*\") to\nmore specific auth route handling.\n\n**Before:**\n\n```\napp.use(\"*\", authCheck);  // Applied to ALL routes including /tasks/*\n```\n\n**After:**\n\n```\napp.use(\"/api/*\", authCheck);   // Applied to API routes\napp.use(\"/views/*\", authCheck); // Applied to view routes\napp.use(\"/\", authCheck);        // Applied to root route\n```\n\n**This ensures:**\n\n✅ `/` (root) still requires user authentication ✅ `/api/*` routes still\nrequire user authentication ✅ `/views/*` routes still require user\nauthentication ✅ `/tasks/*` routes only use webhook authentication (no user\nauth)\n\n**Common mistake:** Using app.use(\"\\*\", webhookAuth) - this applies to all\nroutes incorrectly.\n\n### Flow Logic\n\n- Request to /tasks/\\* → Check X-API-KEY → If valid, proceed to route handler\n  (skip global auth)\n- Request to /tasks/\\* → Check X-API-KEY → If invalid, return 401 (never reaches\n  global auth)\n- Request to other routes → Skip webhook auth → Go to global auth → Then route\n  handler\n\n### Testing Webhook Authentication\n\nTest in this exact order:\n\n1. **Test without header** (should fail):\n\nPOST /tasks/test Expected: 401 \"Authentication required\"\n\n1. **Test with wrong key** (should fail):\n\nPOST /tasks/test Headers: {\"X-API-KEY\": \"wrong-key\"} Expected: 403\n\"Authentication failed\"\n\n1. Test with correct key (should succeed):\n\nPOST /tasks/test\\\nHeaders: {\"X-API-KEY\": \"your-configured-secret-value\"} Expected: 200 (reaches\nyour route handler)\n\n**If step 3 returns 404:** Your route is probably defined as GET instead of\nPOST.\n\n### Debugging Webhook Auth Issues\n\nAdd this temporary debug endpoint:\n\n```\napp.get(\"/debug-webhook\", (c) => {\n  const secret = Deno.env.get(\"NOTION_WEBHOOK_SECRET\");\n  return c.json({\n    hasSecret: !!secret,\n    secretLength: secret?.length || 0,\n  });\n});\n```\n\n**Expected response:** {\"hasSecret\":true,\"secretLength\":>0}\n\nAdd this catch all endpoint:\n\n```\n// Catch-all handler for undefined webhook endpoints\n// This must be the LAST route defined to catch unmatched paths\napp.post(\"*\", (c) => {\n  const path = c.req.path;\n  const method = c.req.method;\n  const returnObj = {\n    error: \"Endpoint not found\",\n    path: path,\n    method: method,\n    availableEndpoints: [\n      \"GET /tasks/debug-webhook\",\n      \"POST /tasks/test\",\n      \"POST /tasks/notion-webhook\",\n    ],\n  };\n  console.log(returnObj);\n\n  return c.json(returnObj, 404);\n});\n```\n\n### Complete Working Example\n\nHere's a complete working webhook endpoint:\n\n```\n// backend/routes/tasks/_tasks.routes.ts\nimport { Hono } from \"npm:hono@3.12.12\";\n\nconst app = new Hono();\n\napp.post(\"/notion-webhook\", async (c) => {\n  // At this point, webhook auth has already passed\n  const body = await c.req.json();\n  console.log(\"Notion webhook received:\", body);\n\n  // Process the webhook...\n\n  return c.json({ success: true });\n});\n\nexport default app;\n```\n\nTest with:\n\nPOST /tasks/notion-webhook Headers: {\"X-API-KEY\":\n\"your-configured-secret-value\"} Body: {\"test\": \"data\"} Expected: 200 {\"success\":\ntrue}\n\n### 4\\. Add Simplified Webhook Testing to Dashboard\n\nUpdate `/backend/routes/views/dashboard.tsx`:\n\n**Import the URL utility in the dashboard:**\n\nAdd this import at the top of `/backend/routes/views/dashboard.tsx`:\n\n```typescript\nimport { getAbsoluteUrl } from \"../../utils/url.ts\";\n```\n\n**Add webhook configuration variables after health data:**\n\n    // Check webhook configuration\n    const webhookSecret = Deno.env.get(\"NOTION_WEBHOOK_SECRET\");\n    const webhookConfigured = !!webhookSecret;\n    const webhookEndpoint = getAbsoluteUrl(c, '/tasks/notion-webhook');\n\n**Note:** We use `getAbsoluteUrl()` here because the webhook endpoint needs to be shared with external services (Notion), unlike internal links which should remain relative.\n\n**Add CSS styles for webhook section (after existing styles):**\n\n    .webhook-section {\n      background: #f8f9fa;\n      border: 1px solid #e9ecef;\n      border-radius: 6px;\n      padding: 20px;\n      margin-top: 20px;\n    }\n    .webhook-section h3 {\n      color: #333;\n      margin-top: 0;\n      margin-bottom: 15px;\n    }\n    .webhook-url {\n      margin-bottom: 20px;\n    }\n    .webhook-endpoint {\n      font-family: 'Monaco', 'Menlo', 'Ubuntu Mono', monospace;\n      font-size: 14px;\n      background: white;\n      padding: 12px;\n      border: 1px solid #dee2e6;\n      border-radius: 4px;\n      word-break: break-all;\n      user-select: all;\n    }\n    .test-section {\n      border-top: 1px solid #dee2e6;\n      padding-top: 20px;\n      margin-top: 20px;\n    }\n    .test-section p {\n      margin-bottom: 15px;\n      color: #495057;\n    }\n    .test-section code {\n      background: #f8f9fa;\n      padding: 2px 4px;\n      border-radius: 3px;\n      font-family: 'Monaco', 'Menlo', 'Ubuntu Mono', monospace;\n      font-size: 13px;\n    }\n    .test-controls {\n      display: flex;\n      gap: 10px;\n      align-items: center;\n      margin-bottom: 15px;\n    }\n    .test-btn {\n      background: #28a745;\n      color: white;\n      border: none;\n      padding: 8px 16px;\n      border-radius: 4px;\n      cursor: pointer;\n      font-size: 14px;\n      transition: background-color 0.2s;\n    }\n    .test-btn:hover {\n      background: #218838;\n    }\n    .test-btn:disabled {\n      background: #6c757d;\n      cursor: not-allowed;\n    }\n    .api-key-input {\n      padding: 6px 10px;\n      border: 1px solid #ced4da;\n      border-radius: 4px;\n      font-size: 14px;\n      width: 200px;\n    }\n    .test-result {\n      background: white;\n      border: 1px solid #dee2e6;\n      border-radius: 4px;\n      padding: 15px;\n      font-family: 'Monaco', 'Menlo', 'Ubuntu Mono', monospace;\n      font-size: 13px;\n      min-height: 60px;\n      white-space: pre-wrap;\n    }\n    .result-success {\n      border-color: #28a745;\n      background: #d4edda;\n    }\n    .result-error {\n      border-color: #dc3545;\n      background: #f8d7da;\n    }\n\n**Add simplified webhook section HTML (after health section):**\n\n    \n      Webhook Endpoint
\n\n      \n        ${webhookEndpoint}
\n      
\n\n      \n        To test: Get the NOTION_WEBHOOK_SECRET value from your vars.env file (provided by your administrator)
\n        \n          \n          \n        
\n        Ready to test webhook authentication...
\n      
\n    
\n\n**Add JavaScript for form submission (before closing body tag):**\n\n    \n\n## Testing Verification\n\n1. Test `/tasks/debug-webhook` (GET) - should show webhook configuration\n2. Test `/tasks/test` (POST) without header - should return 401\n3. Test `/tasks/test` (POST) with wrong key - should return 403\n4. Test `/tasks/test` (POST) with correct key - should return 200\n5. Verify user authentication still works for other routes\n6. Check dashboard shows simplified webhook testing interface\n7. Verify form submission works with both button click and Enter key\n\n## Expected Results\n\nMake sure these are true:\n\n- Webhook endpoints only accessible with correct X-API-KEY\n- User authentication preserved for non-webhook routes\n- Dashboard provides clean, simplified webhook testing interface\n- Form submission works via button click or Enter key\n- All authentication flows working independently\n- Webhook endpoint ready for Notion integration\n\n## Security Considerations\n\n- Webhook middleware should return early (success or failure) without calling\n  next()\n- Never pass webhook requests to the global auth middleware\n- Maintain complete separation between webhook auth and user auth mechanisms\n- Consider rate limiting on /tasks endpoints\n- Use generic error messages that don't reveal authentication mechanism details\n\n## Route Structure\n\n- /tasks/\\* → Webhook auth required (Notion POSTs)\n- /api/\\* → User auth required (if applicable)\n- /\\* → Public routes (static files, etc.)\n\n### 5\\. Update Documentation\n\nUpdate README.md to include webhook authentication section and environment\nvariables.\n\n## Final Deliverables\n\nMake sure these are true:\n\n- Webhook authentication middleware implemented\n- Middleware order correctly configured\n- Test endpoints available\n- Simplified dashboard with webhook testing form\n- Form supports both click and keyboard submission\n- Documentation updated\n- Ready for Notion webhook configuration\n\n---\n\n**Townie, stop here! Before proceeding to additional steps, confirm that this\nstep is working correctly.**\n\n**If everything is working as intended**: conclude this step with these\nmessages:\n\n1. Briefly summarize the work that was just completed and why it's important\n1. Provide the URL to the dashboard endpoint, from which the user can test the\n   new webhook endpoint with the webhook form\n1. Explain that the user will need the `NOTION_WEBHOOK_SECRET` from the\n   `vars.env` to test the webhook endpoint successfully\n1. Explain that we will implement webhooks from Notion in a step that comes\n   later\n",[],[152,202],[152],{"_102":212,"_95":213,"_153":214,"_155":-5,"_156":138,"_157":137,"_159":160,"_104":215,"_99":32,"_162":163,"_164":-5,"_165":22,"_166":-5,"_167":216,"_98":424},"7c97802c-7933-11f0-96c0-0224a6c84d84","backend","0198a99c-4a38-76d0-9aab-a65fe3077ac9",["D",1755192248891],[217,241,255,359,381,395,417],{"_102":218,"_95":219,"_153":220,"_155":214,"_156":138,"_157":137,"_159":160,"_104":221,"_99":32,"_162":163,"_164":-5,"_165":22,"_166":-5,"_167":222,"_98":240},"7c97820c-7933-11f0-96c0-0224a6c84d84","controllers","0198a99c-4a38-76d0-9aab-a8ded408d294",["D",1755192248891],[223,231],{"_102":224,"_95":225,"_153":226,"_155":220,"_156":138,"_157":137,"_159":160,"_104":227,"_99":32,"_162":176,"_164":228,"_165":22,"_166":-5,"_167":229,"_98":230},"7c9743f0-7933-11f0-96c0-0224a6c84d84","README.md","7c97447c-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"# Controllers\n\nBusiness logic coordination between routes and services. Controllers should:\n\n- Handle environment variables and configuration\n- Coordinate multiple service calls\n- Implement business rules and validation\n- Handle service business logic layer (result.success)",[],[213,219,225],{"_102":232,"_95":233,"_153":234,"_155":220,"_156":138,"_157":137,"_159":160,"_104":235,"_99":32,"_162":236,"_164":237,"_165":22,"_166":-5,"_167":238,"_98":239},"7c973860-7933-11f0-96c0-0224a6c84d84","health.controller.ts","7c97391e-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"script","import { getDatabaseById } from \"../services/notion.service.ts\";\n\nexport async function getConfiguredDatabases() {\n  const transcriptsDbId = Deno.env.get(\"FINDINGS_TRANSCRIPTS_DB_ID\");\n  const questionsDbId = Deno.env.get(\"FINDINGS_QUESTIONS_DB_ID\");\n  const reportsDbId = Deno.env.get(\"FINDINGS_REPORTS_DB_ID\");\n\n  const databases = { \n    transcripts: null, \n    questions: null, \n    reports: null \n  };\n  const errors: string[] = [];\n\n  // Check transcripts database\n  if (transcriptsDbId) {\n    const result = await getDatabaseById(transcriptsDbId);\n    if (result.success) {\n      databases.transcripts = result.data;\n    } else {\n      errors.push(`Transcripts DB: ${result.error}`);\n    }\n  } else {\n    errors.push(\"FINDINGS_TRANSCRIPTS_DB_ID not configured\");\n  }\n\n  // Check questions database\n  if (questionsDbId) {\n    const result = await getDatabaseById(questionsDbId);\n    if (result.success) {\n      databases.questions = result.data;\n    } else {\n      errors.push(`Questions DB: ${result.error}`);\n    }\n  } else {\n    errors.push(\"FINDINGS_QUESTIONS_DB_ID not configured\");\n  }\n\n  // Check reports database\n  if (reportsDbId) {\n    const result = await getDatabaseById(reportsDbId);\n    if (result.success) {\n      databases.reports = result.data;\n    } else {\n      errors.push(`Reports DB: ${result.error}`);\n    }\n  } else {\n    errors.push(\"FINDINGS_REPORTS_DB_ID not configured\");\n  }\n\n  return {\n    success: errors.length === 0,\n    data: databases,\n    errors: errors.length > 0 ? errors : undefined,\n    timestamp: new Date().toISOString(),\n  };\n}\n\nexport async function getHealthStatus() {\n  const configuredDatabases = await getConfiguredDatabases();\n  \n  const healthStatus = {\n    status: configuredDatabases.success ? \"ok\" : \"error\",\n    timestamp: new Date().toISOString(),\n    val: \"findings\",\n    databases: {\n      configured: configuredDatabases.success,\n      transcripts: configuredDatabases.data?.transcripts ? \"connected\" : \"error\",\n      questions: configuredDatabases.data?.questions ? \"connected\" : \"error\",\n      reports: configuredDatabases.data?.reports ? \"connected\" : \"error\",\n    }\n  };\n\n  if (configuredDatabases.errors) {\n    healthStatus.errors = configuredDatabases.errors;\n  }\n\n  return healthStatus;\n}",[],[213,219,233],[213,219],{"_102":242,"_95":243,"_153":244,"_155":214,"_156":138,"_157":137,"_159":160,"_104":245,"_99":32,"_162":163,"_164":-5,"_165":22,"_166":-5,"_167":246,"_98":254},"7c9785c2-7933-11f0-96c0-0224a6c84d84","crons","0198a99c-4a38-76d0-9aab-ae2ad2c3d413",["D",1755192248891],[247],{"_102":248,"_95":225,"_153":249,"_155":244,"_156":138,"_157":137,"_159":160,"_104":250,"_99":32,"_162":176,"_164":251,"_165":22,"_166":-5,"_167":252,"_98":253},"7c974648-7933-11f0-96c0-0224a6c84d84","7c9746c0-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"# Crons\n\nScheduled task handlers.",[],[213,243,225],[213,243],{"_102":256,"_95":257,"_153":258,"_155":214,"_156":138,"_157":137,"_159":160,"_104":259,"_99":32,"_162":163,"_164":-5,"_165":22,"_166":-5,"_167":260,"_98":358},"7c9786da-7933-11f0-96c0-0224a6c84d84","routes","0198a99c-4a38-76d0-9aab-b2026fa4a851",["D",1755192248891],[261,283,305,335,342,350],{"_102":262,"_95":263,"_153":264,"_155":258,"_156":138,"_157":137,"_159":160,"_104":265,"_99":32,"_162":163,"_164":-5,"_165":22,"_166":-5,"_167":266,"_98":282},"7c9787ca-7933-11f0-96c0-0224a6c84d84","api","0198a99c-4a38-76d0-9aab-b7603fd8c8b6",["D",1755192248891],[267,274],{"_102":268,"_95":225,"_153":269,"_155":264,"_156":138,"_157":137,"_159":160,"_104":270,"_99":32,"_162":176,"_164":271,"_165":22,"_166":-5,"_167":272,"_98":273},"7c974b3e-7933-11f0-96c0-0224a6c84d84","7c974bac-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"# API Routes\n\nJSON API endpoints for frontend/backend communication.",[],[213,257,263,225],{"_102":275,"_95":276,"_153":277,"_155":264,"_156":138,"_157":137,"_159":160,"_104":278,"_99":32,"_162":236,"_164":279,"_165":22,"_166":-5,"_167":280,"_98":281},"7c974986-7933-11f0-96c0-0224a6c84d84","_api.routes.ts","7c9749fe-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"import { Hono } from \"npm:hono@3.12.12\";\nimport { getHealthStatus } from \"../../controllers/health.controller.ts\";\n\nconst app = new Hono();\n\napp.get(\"/health\", async (c) => {\n  const healthStatus = await getHealthStatus();\n  return c.json(healthStatus);\n});\n\nexport default app;",[],[213,257,263,276],[213,257,263],{"_102":284,"_95":285,"_153":286,"_155":258,"_156":138,"_157":137,"_159":160,"_104":287,"_99":32,"_162":163,"_164":-5,"_165":22,"_166":-5,"_167":288,"_98":304},"7c9788ce-7933-11f0-96c0-0224a6c84d84","tasks","0198a99c-4a38-76d0-9aab-b824b02b6756",["D",1755192248891],[289,296],{"_102":290,"_95":225,"_153":291,"_155":286,"_156":138,"_157":137,"_159":160,"_104":292,"_99":32,"_162":176,"_164":293,"_165":22,"_166":-5,"_167":294,"_98":295},"7c9757a0-7933-11f0-96c0-0224a6c84d84","7c97580e-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"# Task Routes\n\nWebhook handlers for Notion integrations.",[],[213,257,285,225],{"_102":297,"_95":298,"_153":299,"_155":286,"_156":138,"_157":137,"_159":160,"_104":300,"_99":32,"_162":236,"_164":301,"_165":22,"_166":-5,"_167":302,"_98":303},"7c9755de-7933-11f0-96c0-0224a6c84d84","_tasks.routes.ts","7c975642-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"import { Hono } from \"npm:hono@3.12.12\";\n\nconst app = new Hono();\n\n// Debug endpoint to check webhook configuration\napp.get(\"/debug-webhook\", (c) => {\n  const secret = Deno.env.get(\"NOTION_WEBHOOK_SECRET\");\n  return c.json({\n    hasSecret: !!secret,\n    secretLength: secret?.length || 0,\n  });\n});\n\n// Test endpoint for webhook authentication\napp.post(\"/test\", async (c) => {\n  // At this point, webhook auth has already passed\n  return c.json({ \n    success: true, \n    message: \"Webhook authentication successful\",\n    timestamp: new Date().toISOString()\n  });\n});\n\n// Main Notion webhook endpoint\napp.post(\"/notion-webhook\", async (c) => {\n  // At this point, webhook auth has already passed\n  const body = await c.req.json();\n  console.log(\"Notion webhook received:\", body);\n\n  // Process the webhook...\n  // TODO: Add webhook processing logic here\n\n  return c.json({ success: true });\n});\n\n// Catch-all handler for undefined webhook endpoints\n// This must be the LAST route defined to catch unmatched paths\napp.post(\"*\", (c) => {\n  const path = c.req.path;\n  const method = c.req.method;\n  const returnObj = {\n    error: \"Endpoint not found\",\n    path: path,\n    method: method,\n    availableEndpoints: [\n      \"GET /tasks/debug-webhook\",\n      \"POST /tasks/test\",\n      \"POST /tasks/notion-webhook\",\n    ],\n  };\n  console.log(returnObj);\n\n  return c.json(returnObj, 404);\n});\n\nexport default app;",[],[213,257,285,298],[213,257,285],{"_102":306,"_95":307,"_153":308,"_155":258,"_156":138,"_157":137,"_159":160,"_104":309,"_99":32,"_162":163,"_164":-5,"_165":22,"_166":-5,"_167":310,"_98":334},"7c9789be-7933-11f0-96c0-0224a6c84d84","views","0198a99c-4a38-76d0-9aab-bd74b14fc119",["D",1755192248891],[311,318,326],{"_102":312,"_95":225,"_153":313,"_155":308,"_156":138,"_157":137,"_159":160,"_104":314,"_99":32,"_162":176,"_164":315,"_165":22,"_166":-5,"_167":316,"_98":317},"7c976312-7933-11f0-96c0-0224a6c84d84","7c976380-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"# View Routes\n\nServer-side rendered views for frontend.",[],[213,257,307,225],{"_102":319,"_95":320,"_153":321,"_155":308,"_156":138,"_157":137,"_159":160,"_104":322,"_99":32,"_162":236,"_164":323,"_165":22,"_166":-5,"_167":324,"_98":325},"7c97591c-7933-11f0-96c0-0224a6c84d84","_views.routes.ts","7c97598a-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"import { Hono } from \"npm:hono@3.12.12\";\n\nconst app = new Hono();\n\n// TODO: Add routes here\n\nexport default app;",[],[213,257,307,320],{"_102":327,"_95":328,"_153":329,"_155":308,"_156":138,"_157":137,"_159":160,"_104":330,"_99":32,"_162":236,"_164":331,"_165":22,"_166":-5,"_167":332,"_98":333},"7c975a7a-7933-11f0-96c0-0224a6c84d84","dashboard.tsx","7c975af2-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"import { getAbsoluteUrl } from \"../../utils/url.ts\";\nimport { getHealthStatus } from \"../../controllers/health.controller.ts\";\n\nexport default async (c) => {\n  const userEmail = c.get(\"userEmail\");\n  const healthData = await getHealthStatus();\n  const healthUrl = getAbsoluteUrl(c, \"/api/health\");\n  \n  // Check webhook configuration\n  const webhookSecret = Deno.env.get(\"NOTION_WEBHOOK_SECRET\");\n  const webhookConfigured = !!webhookSecret;\n  const webhookEndpoint = getAbsoluteUrl(c, '/tasks/notion-webhook');\n\n  return c.html(`\n    \n    \n    \n      Findings Dashboard\n      \n    \n    \n      \n        \n          Findings Dashboard
\n          \n            Welcome, ${userEmail}\n            Logout\n          
\n        
\n        \n        \n          \n            Welcome to your Findings Dashboard
\n            This is your central hub for managing research findings, transcripts, questions, and reports.
\n          
\n\n          \n            \n              System Health Status\n              \n                ${healthData.status}\n              \n            
\n            Current system status and database connectivity:
\n            \n            ${JSON.stringify(healthData, null, 2)}
\n            \n            \n              View Raw Health Endpoint →\n            \n\n            \n              Webhook Endpoint
\n\n              \n                ${webhookEndpoint}
\n              
\n\n              \n                To test: Get the NOTION_WEBHOOK_SECRET value from your vars.env file (provided by your administrator)
\n                \n                  \n                  \n                
\n                Ready to test webhook authentication...
\n              
\n            
\n          
\n        
\n      
\n\n      \n    \n    \n  `);\n};",[],[213,257,307,328],[213,257,307],{"_102":336,"_95":225,"_153":337,"_155":258,"_156":138,"_157":137,"_159":160,"_104":338,"_99":32,"_162":176,"_164":339,"_165":22,"_166":-5,"_167":340,"_98":341},"7c975444-7933-11f0-96c0-0224a6c84d84","7c9754c6-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"# Routes\n\nHTTP route handlers organized by functionality. Each subdirectory has a `_[directory_name].routes.ts` file that mounts routes for that section.",[],[213,257,225],{"_102":343,"_95":344,"_153":345,"_155":258,"_156":138,"_157":137,"_159":160,"_104":346,"_99":32,"_162":236,"_164":347,"_165":22,"_166":-5,"_167":348,"_98":349},"7c974c9c-7933-11f0-96c0-0224a6c84d84","authCheck.ts","7c974d0a-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"// Public routes that don't require authentication\nconst PUBLIC_ROUTES = [\n  \"/api/health\", // Health check endpoint should be public\n  // Add other public routes here as needed\n  // '/demo/:id',  // Example: public demo viewing\n  // '/api/public', // Example: public API endpoints\n];\n\n// Helper function to check if a route is public\nfunction isPublicRoute(path: string): boolean {\n  return PUBLIC_ROUTES.some((route) => {\n    // Handle exact matches\n    if (route === path) return true;\n\n    // Handle wildcard patterns (basic implementation)\n    if (route.includes(\"*\")) {\n      const pattern = route.replace(\"*\", \".*\");\n      return new RegExp(`^${pattern}$`).test(path);\n    }\n\n    // Handle route parameters (basic implementation)\n    if (route.includes(\":\")) {\n      const pattern = route.replace(/:[^/]+/g, \"[^/]+\");\n      return new RegExp(`^${pattern}$`).test(path);\n    }\n\n    return false;\n  });\n}\n\nexport default async (c, next) => {\n  // Allow public routes to bypass authentication\n  if (isPublicRoute(c.req.path)) {\n    await next();\n    return;\n  }\n\n  const email = c.req.header(\"X-LastLogin-Email\");\n\n  if (!email) {\n    // Show login page if not authenticated\n    return c.html(`\n      \n      \n      \n        Findings - Login Required\n        \n      \n      \n        \n          Sign in to Findings
\n          Sign in to access your dashboard and manage your research findings.
\n          \n            Loading login button...
\n          
\n          \n            via LastLogin\n          
\n        
\n\n        \n      \n      \n    `);\n  }\n\n  // If authenticated, store email in context for use by routes\n  c.set(\"userEmail\", email);\n\n  // Continue to the next middleware/route\n  await next();\n};",[],[213,257,344],{"_102":351,"_95":352,"_153":353,"_155":258,"_156":138,"_157":137,"_159":160,"_104":354,"_99":32,"_162":236,"_164":355,"_165":22,"_166":-5,"_167":356,"_98":357},"7c9764a2-7933-11f0-96c0-0224a6c84d84","webhookAuthCheck.ts","7c97651a-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"export default async (c, next) => {\n  // Allow GET requests for debug endpoints to bypass webhook auth\n  if (c.req.method === \"GET\") {\n    await next();\n    return;\n  }\n\n  const apiKey = c.req.header(\"X-API-KEY\");\n  const expectedSecret = Deno.env.get(\"NOTION_WEBHOOK_SECRET\");\n\n  // Check if webhook secret is configured\n  if (!expectedSecret) {\n    console.log(\"Webhook authentication failed: NOTION_WEBHOOK_SECRET not configured\");\n    return c.json({ error: \"Authentication required\" }, 401);\n  }\n\n  // Check if API key is provided\n  if (!apiKey) {\n    console.log(\"Webhook authentication failed: No X-API-KEY header provided\");\n    return c.json({ error: \"Authentication required\" }, 401);\n  }\n\n  // Use constant-time comparison to prevent timing attacks\n  const expectedBuffer = new TextEncoder().encode(expectedSecret);\n  const providedBuffer = new TextEncoder().encode(apiKey);\n\n  // Ensure buffers are the same length for constant-time comparison\n  if (expectedBuffer.length !== providedBuffer.length) {\n    console.log(\"Webhook authentication failed: Invalid API key length\");\n    return c.json({ error: \"Authentication failed\" }, 403);\n  }\n\n  // Constant-time comparison\n  let isValid = true;\n  for (let i = 0; i < expectedBuffer.length; i++) {\n    if (expectedBuffer[i] !== providedBuffer[i]) {\n      isValid = false;\n    }\n  }\n\n  if (!isValid) {\n    console.log(\"Webhook authentication failed: Invalid API key\");\n    return c.json({ error: \"Authentication failed\" }, 403);\n  }\n\n  // Authentication successful, proceed to route handler\n  await next();\n};",[],[213,257,352],[213,257],{"_102":360,"_95":361,"_153":362,"_155":214,"_156":138,"_157":137,"_159":160,"_104":363,"_99":32,"_162":163,"_164":-5,"_165":22,"_166":-5,"_167":364,"_98":380},"7c978aa4-7933-11f0-96c0-0224a6c84d84","services","0198a99c-4a38-76d0-9aab-c07ccefc3c26",["D",1755192248891],[365,372],{"_102":366,"_95":225,"_153":367,"_155":362,"_156":138,"_157":137,"_159":160,"_104":368,"_99":32,"_162":176,"_164":369,"_165":22,"_166":-5,"_167":370,"_98":371},"7c977410-7933-11f0-96c0-0224a6c84d84","7c977492-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"# Services\n\nExternal API integrations - pure API calls only. Services should:\n\n- Make direct API calls to external systems\n- Return consistent `{ success: boolean, data?: any, error?: string }` format\n- NOT handle environment variables or business logic\n- NOT orchestrate multiple calls",[],[213,361,225],{"_102":373,"_95":374,"_153":375,"_155":362,"_156":138,"_157":137,"_159":160,"_104":376,"_99":32,"_162":236,"_164":377,"_165":22,"_166":-5,"_167":378,"_98":379},"7c976a56-7933-11f0-96c0-0224a6c84d84","notion.service.ts","7c976ad8-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"import { Client } from \"npm:@notionhq/client\";\n\nconst notion = new Client({ auth: Deno.env.get(\"NOTION_API_KEY\") });\n\nexport async function getDatabases() {\n  try {\n    const response = await notion.search({\n      filter: {\n        property: \"object\",\n        value: \"database\",\n      },\n    });\n    return {\n      success: true,\n      data: response,\n      timestamp: new Date().toISOString(),\n    };\n  } catch (error) {\n    return {\n      success: false,\n      error: error.message,\n      timestamp: new Date().toISOString(),\n    };\n  }\n}\n\nexport async function getDatabaseById(databaseId: string) {\n  try {\n    const response = await notion.databases.retrieve({\n      database_id: databaseId,\n    });\n    return {\n      success: true,\n      data: response,\n      timestamp: new Date().toISOString(),\n    };\n  } catch (error) {\n    return {\n      success: false,\n      error: error.message,\n      timestamp: new Date().toISOString(),\n    };\n  }\n}",[],[213,361,374],[213,361],{"_102":382,"_95":383,"_153":384,"_155":214,"_156":138,"_157":137,"_159":160,"_104":385,"_99":32,"_162":163,"_164":-5,"_165":22,"_166":-5,"_167":386,"_98":394},"7c978b8a-7933-11f0-96c0-0224a6c84d84","types","0198a99c-4a38-76d0-9aab-c616707b11c3",["D",1755192248891],[387],{"_102":388,"_95":225,"_153":389,"_155":384,"_156":138,"_157":137,"_159":160,"_104":390,"_99":32,"_162":176,"_164":391,"_165":22,"_166":-5,"_167":392,"_98":393},"7c9775c8-7933-11f0-96c0-0224a6c84d84","7c977640-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"# Types\n\nShared TypeScript type definitions.",[],[213,383,225],[213,383],{"_102":396,"_95":397,"_153":398,"_155":214,"_156":138,"_157":137,"_159":160,"_104":399,"_99":32,"_162":163,"_164":-5,"_165":22,"_166":-5,"_167":400,"_98":416},"7c978c66-7933-11f0-96c0-0224a6c84d84","utils","0198a99c-4a38-76d0-9aab-cb92cb152550",["D",1755192248891],[401,408],{"_102":402,"_95":225,"_153":403,"_155":398,"_156":138,"_157":137,"_159":160,"_104":404,"_99":32,"_162":176,"_164":405,"_165":22,"_166":-5,"_167":406,"_98":407},"7c97773a-7933-11f0-96c0-0224a6c84d84","7c9777a8-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"# Utils\n\nCommon utility functions.",[],[213,397,225],{"_102":409,"_95":410,"_153":411,"_155":398,"_156":138,"_157":137,"_159":160,"_104":412,"_99":32,"_162":236,"_164":413,"_165":22,"_166":-5,"_167":414,"_98":415},"7c977898-7933-11f0-96c0-0224a6c84d84","url.ts","7c977906-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"export function getAbsoluteUrl(c: any, path: string): string {\n  const protocol = c.req.header(\"x-forwarded-proto\") || \"https\";\n  const host = c.req.header(\"host\");\n  return `${protocol}://${host}${path}`;\n}",[],[213,397,410],[213,397],{"_102":418,"_95":225,"_153":419,"_155":214,"_156":138,"_157":137,"_159":160,"_104":420,"_99":32,"_162":176,"_164":421,"_165":22,"_166":-5,"_167":422,"_98":423},"7c9747ce-7933-11f0-96c0-0224a6c84d84","7c97483c-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"# Backend\n\nThis directory contains all server-side code organized by functionality:\n\n- `/routes` - HTTP route handlers organized by functionality\n- `/api` - JSON API endpoints for frontend/backend communication  \n- `/tasks` - Webhook handlers for Notion integrations\n- `/views` - Server-side rendered views for frontend\n- `/services` - External API integrations (pure API calls only)\n- `/controllers` - Business logic coordination between routes and services\n- `/crons` - Scheduled task handlers\n- `/types` - Shared TypeScript type definitions\n- `/utils` - Common utility functions\n\n## Architecture\n\n- **Services**: Pure API calls to external systems\n- **Controllers**: Business logic and orchestration\n- **Routes**: HTTP request/response handling only",[],[213,225],[213],{"_102":426,"_95":427,"_153":428,"_155":-5,"_156":138,"_157":137,"_159":160,"_104":429,"_99":32,"_162":163,"_164":-5,"_165":22,"_166":-5,"_167":430,"_98":438},"7c978f04-7933-11f0-96c0-0224a6c84d84","frontend","0198a99c-4a38-76d0-9aab-cda1186a9d58",["D",1755192248891],[431],{"_102":432,"_95":225,"_153":433,"_155":428,"_156":138,"_157":137,"_159":160,"_104":434,"_99":32,"_162":176,"_164":435,"_165":22,"_166":-5,"_167":436,"_98":437},"7c9779f6-7933-11f0-96c0-0224a6c84d84","7c977a64-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"# Frontend\n\nClient-side files that render in the browser.",[],[427,225],[427],{"_102":440,"_95":441,"_153":442,"_155":-5,"_156":138,"_157":137,"_159":160,"_104":443,"_99":32,"_162":163,"_164":-5,"_165":22,"_166":-5,"_167":444,"_98":452},"7c979094-7933-11f0-96c0-0224a6c84d84","shared","0198a99c-4a38-76d0-9aab-d13b486396e3",["D",1755192248891],[445],{"_102":446,"_95":225,"_153":447,"_155":442,"_156":138,"_157":137,"_159":160,"_104":448,"_99":32,"_162":176,"_164":449,"_165":22,"_166":-5,"_167":450,"_98":451},"7c977ea6-7933-11f0-96c0-0224a6c84d84","7c977f1e-7933-11f0-96c0-0224a6c84d84",["D",1755192248891],"# Shared\n\nFiles used by both backend and frontend. Code in this directory must work in both environments.",[],[441,225],[441],{"_102":454,"_95":455,"_153":456,"_155":-5,"_156":138,"_157":186,"_159":160,"_104":457,"_99":32,"_162":176,"_164":458,"_165":22,"_166":-5,"_167":459,"_98":460},"c7111680-7911-11f0-b9ae-0224a6c84d84",".vtignore","c7111720-7911-11f0-b9ae-0224a6c84d84",["D",1755177770925],".git\n.vscode\n.cursorrules\n.DS_Store\nnode_modules\nvendor\nvars.env",[],[455],{"_102":462,"_95":463,"_153":464,"_155":-5,"_156":138,"_157":465,"_159":160,"_104":466,"_99":32,"_162":176,"_164":467,"_165":22,"_166":-5,"_167":468,"_98":469},"c70a70dc-7911-11f0-8f9c-0224a6c84d84","deno.json","c70a7208-7911-11f0-8f9c-0224a6c84d84",13,["D",1755177770884],"{\n  \"$schema\": \"https://raw.githubusercontent.com/denoland/deno/348900b8b79f4a434cab4c74b3bc8d4d2fa8ee74/cli/schemas/config-file.v1.json\",\n  \"lock\": false,\n  \"compilerOptions\": {\n    \"noImplicitAny\": false,\n    \"strict\": false,\n    \"types\": [\n      \"https://www.val.town/types/valtown.d.ts\"\n    ],\n    \"lib\": [\n      \"dom\",\n      \"dom.iterable\",\n      \"dom.asynciterable\",\n      \"deno.ns\",\n      \"deno.unstable\"\n    ]\n  },\n  \"lint\": {\n    \"files\": {\n      \"include\": [\n        \"deno:/https/esm.town/**/*\"\n      ]\n    },\n    \"rules\": {\n      \"exclude\": [\n        \"no-explicit-any\"\n      ]\n    }\n  },\n  \"node_modules_dir\": false,\n  \"experimental\": {\n    \"unstable-node-globals\": true,\n    \"unstable-temporal\": true,\n    \"unstable-worker-options\": true,\n    \"unstable-sloppy-imports\": true\n  }\n}",[],[463],{"_102":471,"_95":472,"_153":473,"_155":-5,"_156":138,"_157":474,"_159":160,"_104":475,"_99":476,"_162":477,"_164":478,"_165":22,"_166":479,"_167":480,"_98":481},"eeff05ae-792e-11f0-aef2-0224a6c84d84","main.tsx","2af9f08e-790f-11f0-b3db-0224a6c84d84",143,["D",1755190293343],8,"http","import { Hono } from \"npm:hono@3.12.12\";\nimport { lastlogin } from \"https://esm.town/v/stevekrouse/lastlogin_safe\";\n\n// Import route modules\nimport authCheck from \"./backend/routes/authCheck.ts\";\nimport webhookAuth from \"./backend/routes/webhookAuthCheck.ts\";\nimport dashboardRoute from \"./backend/routes/views/dashboard.tsx\";\nimport apiRoutes from \"./backend/routes/api/_api.routes.ts\";\nimport taskRoutes from \"./backend/routes/tasks/_tasks.routes.ts\";\nimport viewRoutes from \"./backend/routes/views/_views.routes.ts\";\n\nconst app = new Hono();\n\n// Unwrap Hono errors to see original error details\napp.onError((err, c) => {\n  throw err;\n});\n\n// 1. Webhook auth - ONLY for /tasks/* routes\napp.use(\"/tasks/*\", webhookAuth);\n\n// 2. User auth - for ALL routes EXCEPT /tasks/*\napp.use(\"/api/*\", authCheck);\napp.use(\"/views/*\", authCheck);\napp.use(\"/\", authCheck);\n\n// Dashboard route (authenticated)\napp.get(\"/\", dashboardRoute);\n\n// 3. Mount routes AFTER middleware\napp.route(\"/api\", apiRoutes);\napp.route(\"/tasks\", taskRoutes);\napp.route(\"/views\", viewRoutes);\n\n// Main HTTP handler\nasync function handler(request: Request): Promise {\n  return app.fetch(request);\n}\n\n// Wrap and export the main HTTP handler with lastlogin\nexport default lastlogin(handler);","findings2",[],[472],"files",[150,169,180,190,200,211,217,223,231,241,247,255,261,267,274,283,289,296,305,311,318,326,335,342,350,359,365,372,381,387,395,401,408,417,425,431,439,445,453,461,470],"counts",{"_486":32,"_487":158,"_488":489,"_490":491},"pulls","branches","forks",1,"envVars",6,"contents",[494,497,500,503,506,509,512],{"_102":151,"_95":152,"_153":154,"_155":-5,"_156":138,"_157":158,"_159":160,"_104":495,"_99":32,"_162":163,"_164":-5,"_165":22,"_166":-5,"_98":496},["D",1755177770479],[152],{"_102":212,"_95":213,"_153":214,"_155":-5,"_156":138,"_157":137,"_159":160,"_104":498,"_99":32,"_162":163,"_164":-5,"_165":22,"_166":-5,"_98":499},["D",1755192248891],[213],{"_102":426,"_95":427,"_153":428,"_155":-5,"_156":138,"_157":137,"_159":160,"_104":501,"_99":32,"_162":163,"_164":-5,"_165":22,"_166":-5,"_98":502},["D",1755192248891],[427],{"_102":440,"_95":441,"_153":442,"_155":-5,"_156":138,"_157":137,"_159":160,"_104":504,"_99":32,"_162":163,"_164":-5,"_165":22,"_166":-5,"_98":505},["D",1755192248891],[441],{"_102":454,"_95":455,"_153":456,"_155":-5,"_156":138,"_157":186,"_159":160,"_104":507,"_99":32,"_162":176,"_164":458,"_165":22,"_166":-5,"_98":508},["D",1755177770925],[455],{"_102":462,"_95":463,"_153":464,"_155":-5,"_156":138,"_157":465,"_159":160,"_104":510,"_99":32,"_162":176,"_164":467,"_165":22,"_166":-5,"_98":511},["D",1755177770884],[463],{"_102":471,"_95":472,"_153":473,"_155":-5,"_156":138,"_157":474,"_159":160,"_104":513,"_99":476,"_162":477,"_164":478,"_165":22,"_166":479,"_98":514},["D",1755190293343],[472],"upstreamProject","upstreamBranch","emptyEnvVars","isNew","flags",[],"routes/_app.x.$handle.$name.remixes",{"_93":94,"_95":96,"_100":523,"_488":528,"_536":-5},{"_102":103,"_95":96,"_104":524,"_106":-5,"_107":22,"_108":109,"_110":111,"_112":113,"_14":114,"_115":-5,"_116":22,"_117":-5,"_118":32,"_16":119,"_120":121,"_122":121,"_123":124,"_125":124,"_126":124,"_127":121,"_128":121,"_23":525,"_132":526,"_135":527,"_147":22},["D",1755176650069],{"_93":94,"_130":131},{"_93":94,"_134":131},{"_99":137,"_95":43,"_102":138,"_139":103,"_140":-5,"_141":-5,"_142":-5,"_143":-5,"_144":-5,"_145":96,"_146":94},[529],{"_102":530,"_95":531,"_110":-5,"_112":532,"_108":109,"_14":114,"_16":119,"_147":22,"_23":533,"_132":534,"_115":-5,"_116":22,"_104":535,"_118":32},"d0eeb5a0-7951-11f0-8810-0224a6c84d84","findings","https://imagedelivery.net/iHX6Ovru0O7AjmyT5yZRoA/c62a156b-37c5-46ed-47f2-b6fdd4bd1a00/square512",{"_93":94,"_130":131},{"_93":94,"_134":131},["D",1755205275298],"upstream","actionData","errors"]

lightweight

findings-base