\n ${alert.level === \"critical\" ? \"🚨\" : \"⚠️\"} Incubator ${alert.level.toUpperCase()} Alert\n

${alert.message}

Current Readings

Temperature: ${temperatureF.toFixed(1)}°F
Humidity: ${humidity.toFixed(1)}%
Day: ${currentDay} of ${INCUBATION_CONFIG.totalDays}
Phase: ${isLockdown ? \"Lockdown\" : \"Incubation\"}

\n Quail Egg Incubator Monitor\n

\n `,\n });\n\n // Record the alert\n await recordAlert(alert.type, alert.level, temperatureF, humidity, alert.message);\n }\n }\n}\n",[],[185,246,253],{"_104":261,"_96":262,"_156":263,"_158":247,"_159":141,"_160":264,"_162":118,"_106":265,"_101":266,"_164":203,"_166":267,"_167":22,"_168":-5,"_169":268,"_99":269},"21ea414a-f62a-11f0-b56b-42dde27851f2","decoder.ts","31fa7226-f5bc-11f0-b5fb-42dde27851f2",91,["D",1768932126645],1,"// RAK7204 LoRaWAN payload decoder (Cayenne LPP format)\nimport type { DecodedRAK7204Payload } from \"../../shared/types.ts\";\n\n/**\n * Cayenne LPP channel types used by RAK7204\n */\nconst LPP_TYPES = {\n ANALOG_INPUT: 0x02, // 2 bytes, 0.01 signed\n TEMPERATURE: 0x67, // 2 bytes, 0.1°C signed\n HUMIDITY: 0x68, // 1 byte, 0.5% unsigned\n BAROMETER: 0x73, // 2 bytes, 0.1 hPa unsigned\n};\n\n/**\n * Decode RAK7204 Cayenne LPP payload\n *\n * Payload structure (variable length, TLV format):\n * Each field: [channel] [type] [data...]\n *\n * RAK7204 fields:\n * - Battery: channel 0x08, type 0x02 (analog), 2 bytes, multiplier 0.01V\n * - Humidity: channel 0x07, type 0x68, 1 byte, multiplier 0.5%\n * - Pressure: channel 0x06, type 0x73, 2 bytes, multiplier 0.1 hPa\n * - Temperature: channel 0x02, type 0x67, 2 bytes, multiplier 0.1°C signed\n * - Gas Resistance: channel 0x04, type 0x02 (analog), 2 bytes, multiplier 0.01 kΩ\n */\nexport function decodeRAK7204Payload(base64Data: string): DecodedRAK7204Payload {\n // Decode base64 to bytes\n const binaryString = atob(base64Data);\n const bytes = new Uint8Array(binaryString.length);\n for (let i = 0; i < binaryString.length; i++) {\n bytes[i] = binaryString.charCodeAt(i);\n }\n\n const result: DecodedRAK7204Payload = {\n batteryVoltage: 0,\n temperatureCelsius: 0,\n humidity: 0,\n };\n\n let i = 0;\n while (i < bytes.length - 2) {\n const channel = bytes[i];\n const type = bytes[i + 1];\n i += 2;\n\n switch (type) {\n case LPP_TYPES.ANALOG_INPUT: {\n // 2 bytes signed, multiplier depends on channel\n if (i + 2 > bytes.length) break;\n let value = (bytes[i] << 8) | bytes[i + 1];\n // Handle signed value\n if (value > 0x7fff) value -= 0x10000;\n\n if (channel === 0x08) {\n // Battery voltage: 0.01V multiplier\n result.batteryVoltage = value * 0.01;\n } else if (channel === 0x04) {\n // Gas resistance: 0.01 kΩ multiplier\n result.gasResistance = value * 0.01;\n }\n i += 2;\n break;\n }\n\n case LPP_TYPES.TEMPERATURE: {\n // 2 bytes signed, 0.1°C\n if (i + 2 > bytes.length) break;\n let value = (bytes[i] << 8) | bytes[i + 1];\n if (value > 0x7fff) value -= 0x10000;\n result.temperatureCelsius = value * 0.1;\n i += 2;\n break;\n }\n\n case LPP_TYPES.HUMIDITY: {\n // 1 byte unsigned, 0.5%\n if (i + 1 > bytes.length) break;\n result.humidity = bytes[i] * 0.5;\n i += 1;\n break;\n }\n\n case LPP_TYPES.BAROMETER: {\n // 2 bytes unsigned, 0.1 hPa\n if (i + 2 > bytes.length) break;\n const value = (bytes[i] << 8) | bytes[i + 1];\n result.pressure = value * 0.1;\n i += 2;\n break;\n }\n\n default:\n // Unknown type, try to skip (assume 2 bytes)\n i += 2;\n break;\n }\n }\n\n return result;\n}\n\n/**\n * Validate decoded payload values are within reasonable ranges\n */\nexport function validatePayload(decoded: DecodedRAK7204Payload): { valid: boolean; errors: string[] } {\n const errors: string[] = [];\n\n // Battery should be between 2.0V and 4.5V\n if (decoded.batteryVoltage < 2.0 || decoded.batteryVoltage > 4.5) {\n errors.push(`Battery voltage ${decoded.batteryVoltage}V outside expected range (2.0-4.5V)`);\n }\n\n // Temperature should be between -40°C and 85°C (BME680 operating range)\n if (decoded.temperatureCelsius < -40 || decoded.temperatureCelsius > 85) {\n errors.push(`Temperature ${decoded.temperatureCelsius}°C outside sensor range (-40 to 85°C)`);\n }\n\n // Humidity should be between 0% and 100%\n if (decoded.humidity < 0 || decoded.humidity > 100) {\n errors.push(`Humidity ${decoded.humidity}% outside valid range (0-100%)`);\n }\n\n return {\n valid: errors.length === 0,\n errors,\n };\n}\n",[],[185,246,262],{"_104":271,"_96":272,"_156":273,"_158":247,"_159":141,"_160":274,"_162":118,"_106":275,"_101":32,"_164":203,"_166":276,"_167":22,"_168":-5,"_169":277,"_99":278},"31f2247c-f5bc-11f0-97e8-42dde27851f2","incubation.ts","31f22526-f5bc-11f0-97e8-42dde27851f2",25,["D",1768884908905],"// Incubation phase and status calculations\nimport { INCUBATION_CONFIG } from \"../../shared/constants.ts\";\nimport { getDailyTip } from \"../../shared/dailyTips.ts\";\nimport type { IncubationStatus, AlertThresholds, DailyTip } from \"../../shared/types.ts\";\n\n/**\n * Calculate the current incubation day (1-based)\n */\nexport function getCurrentDay(startDate: Date = INCUBATION_CONFIG.startDate): number {\n const now = new Date();\n const diffMs = now.getTime() - startDate.getTime();\n const diffDays = Math.floor(diffMs / (1000 * 60 * 60 * 24));\n return diffDays + 1; // Day 1 is the first day\n}\n\n/**\n * Determine the current incubation phase\n */\nexport function getPhase(\n day: number\n): \"incubation\" | \"lockdown\" | \"hatching\" | \"complete\" {\n if (day < 1) return \"incubation\";\n if (day < INCUBATION_CONFIG.lockdownStartDay) return \"incubation\";\n if (day <= INCUBATION_CONFIG.totalDays) return \"lockdown\";\n if (day <= INCUBATION_CONFIG.totalDays + 1) return \"hatching\";\n return \"complete\";\n}\n\n/**\n * Calculate full incubation status\n */\nexport function calculateIncubationStatus(\n startDate: Date = INCUBATION_CONFIG.startDate\n): IncubationStatus {\n const currentDay = getCurrentDay(startDate);\n const daysRemaining = Math.max(0, INCUBATION_CONFIG.totalDays - currentDay + 1);\n const phase = getPhase(currentDay);\n\n // Calculate dates\n const lockdownDate = new Date(startDate);\n lockdownDate.setDate(lockdownDate.getDate() + INCUBATION_CONFIG.lockdownStartDay - 1);\n\n const hatchDate = new Date(startDate);\n hatchDate.setDate(hatchDate.getDate() + INCUBATION_CONFIG.totalDays - 1);\n\n // Progress percentage (0-100)\n const progressPercent = Math.min(\n 100,\n Math.max(0, ((currentDay - 1) / INCUBATION_CONFIG.totalDays) * 100)\n );\n\n return {\n currentDay,\n daysRemaining,\n phase,\n lockdownDate: lockdownDate.toISOString(),\n hatchDate: hatchDate.toISOString(),\n startDate: startDate.toISOString(),\n progressPercent,\n };\n}\n\n/**\n * Get the target humidity range for the current phase\n */\nexport function getTargetHumidity(day: number): { min: number; max: number } {\n if (day >= INCUBATION_CONFIG.lockdownStartDay) {\n return INCUBATION_CONFIG.humidity.lockdown;\n }\n return INCUBATION_CONFIG.humidity.incubation;\n}\n\n/**\n * Evaluate current readings against thresholds\n */\nexport function getAlertThresholds(\n temperatureF: number,\n humidity: number,\n currentDay: number\n): AlertThresholds {\n const { temp } = INCUBATION_CONFIG;\n const humidityTarget = getTargetHumidity(currentDay);\n\n // Determine temperature status\n let tempStatus: AlertThresholds[\"temperature\"][\"status\"];\n if (temperatureF < temp.criticalMin) {\n tempStatus = \"critical-low\";\n } else if (temperatureF > temp.criticalMax) {\n tempStatus = \"critical-high\";\n } else if (temperatureF < temp.warningMin) {\n tempStatus = \"warning-low\";\n } else if (temperatureF > temp.warningMax) {\n tempStatus = \"warning-high\";\n } else {\n tempStatus = \"ideal\";\n }\n\n // Determine humidity status\n let humidityStatus: AlertThresholds[\"humidity\"][\"status\"];\n if (humidity < humidityTarget.min) {\n humidityStatus = \"low\";\n } else if (humidity > humidityTarget.max) {\n humidityStatus = \"high\";\n } else {\n humidityStatus = \"ideal\";\n }\n\n return {\n temperature: {\n current: temperatureF,\n status: tempStatus,\n },\n humidity: {\n current: humidity,\n target: humidityTarget,\n status: humidityStatus,\n },\n };\n}\n\n/**\n * Get the daily tip for the current day\n */\nexport function getCurrentDailyTip(\n startDate: Date = INCUBATION_CONFIG.startDate\n): DailyTip {\n const currentDay = getCurrentDay(startDate);\n return getDailyTip(currentDay);\n}\n",[],[185,246,272],[185,246],{"_104":281,"_96":282,"_156":116,"_158":186,"_159":141,"_160":283,"_162":118,"_106":284,"_101":285,"_164":286,"_166":287,"_167":22,"_168":-5,"_169":288,"_99":289},"5295345a-f641-11f0-82b2-42dde27851f2","index.http.tsx",115,["D",1768942086718],5,"http","// Main Hono HTTP entry point for Incubator Tracker\nimport { Hono } from \"https://esm.sh/hono@3.11.7\";\nimport { serveFile, readFile } from \"https://esm.town/v/std/utils@85-main/index.ts\";\nimport { runMigrations } from \"./database/migrations.ts\";\nimport { webhookRouter } from \"./routes/webhook.ts\";\nimport { apiRouter } from \"./routes/api.ts\";\nimport { getLatestReading, getRecentReadings } from \"./database/queries.ts\";\nimport { calculateIncubationStatus, getCurrentDailyTip, getAlertThresholds } from \"./services/incubation.ts\";\nimport { CALIBRATION } from \"../shared/constants.ts\";\n\nconst app = new Hono();\n\n// Simple health check (before any middleware)\napp.get(\"/health\", (c) => c.json({ status: \"ok\", timestamp: new Date().toISOString() }));\n\n// Unwrap Hono errors to see original error details\napp.onError((err, c) => {\n throw err;\n});\n\n// Run migrations lazily on first request\nlet migrationsRun = false;\napp.use(\"*\", async (c, next) => {\n if (!migrationsRun) {\n try {\n await runMigrations();\n migrationsRun = true;\n } catch (err) {\n console.error(\"Migration error:\", err);\n return c.json({ error: \"Migration failed\", details: String(err) }, 500);\n }\n }\n return next();\n});\n\n// Mount routes\napp.route(\"/webhook\", webhookRouter);\napp.route(\"/api\", apiRouter);\n\n// Serve static files from frontend/ and shared/\napp.get(\"/frontend/*\", (c) => serveFile(c.req.path, import.meta.url));\napp.get(\"/shared/*\", (c) => serveFile(c.req.path, import.meta.url));\n\n// Serve main dashboard with initial data\napp.get(\"/\", async (c) => {\n let html = await readFile(\"/frontend/index.html\", import.meta.url);\n\n // Inject initial data to avoid extra round-trips\n const currentReading = await getLatestReading();\n const incubationStatus = calculateIncubationStatus();\n const dailyTip = getCurrentDailyTip();\n // Apply calibration for alert thresholds\n const calibratedTempF = currentReading\n ? currentReading.temperatureF + CALIBRATION.temperatureF\n : 0;\n const alerts = currentReading\n ? getAlertThresholds(\n calibratedTempF,\n currentReading.humidity,\n incubationStatus.currentDay\n )\n : null;\n\n const initialData = {\n currentReading,\n incubationStatus,\n dailyTip,\n alerts,\n recentReadings: await getRecentReadings(24 * 60), // Last 24 hours\n };\n\n const dataScript = ``;\n\n html = html.replace(\"\", `${dataScript}`);\n return c.html(html);\n});\n\n// This is the entry point for HTTP vals\nexport default app.fetch;\n",[],[185,282],[185],{"_104":292,"_96":293,"_156":294,"_158":-5,"_159":141,"_160":295,"_162":118,"_106":296,"_101":32,"_164":165,"_166":-5,"_167":22,"_168":-5,"_169":297,"_99":387},"30c1433a-f5bc-11f0-90d9-42dde27851f2","frontend","30c14402-f5bc-11f0-90d9-42dde27851f2",2,["D",1768884906906],[298,369,378],{"_104":299,"_96":300,"_156":301,"_158":294,"_159":141,"_160":302,"_162":118,"_106":303,"_101":32,"_164":165,"_166":-5,"_167":22,"_168":-5,"_169":304,"_99":368},"31309302-f5bc-11f0-a7c1-42dde27851f2","components","313093e8-f5bc-11f0-a7c1-42dde27851f2",6,["D",1768884907625],[305,314,323,332,341,350,359],{"_104":306,"_96":307,"_156":308,"_158":301,"_159":141,"_160":309,"_162":118,"_106":310,"_101":295,"_164":203,"_166":311,"_167":22,"_168":-5,"_169":312,"_99":313},"2ec88e08-f5cb-11f0-bfe4-42dde27851f2","AlertBanner.tsx","31ae4180-f5bc-11f0-9ddc-42dde27851f2",70,["D",1768891346043],"/** @jsxImportSource https://esm.sh/react@18.2.0 */\nimport React from \"https://esm.sh/react@18.2.0\";\n\ninterface AlertThresholds {\n temperature: {\n current: number;\n status: \"critical-low\" | \"warning-low\" | \"ideal\" | \"warning-high\" | \"critical-high\";\n };\n humidity: {\n current: number;\n target: { min: number; max: number };\n status: \"low\" | \"ideal\" | \"high\";\n };\n}\n\ninterface Props {\n alerts: AlertThresholds;\n}\n\nexport function AlertBanner({ alerts }: Props) {\n const tempStatus = alerts.temperature.status;\n const isCritical = tempStatus === \"critical-low\" || tempStatus === \"critical-high\";\n\n // Only show banner for non-ideal conditions\n if (tempStatus === \"ideal\") {\n return null;\n }\n\n const getMessage = () => {\n switch (tempStatus) {\n case \"critical-low\":\n return {\n pillClass: \"pill-red\",\n pillLabel: \"Critical\",\n title: \"Temperature Too Low\",\n message: `Temperature at ${alerts.temperature.current.toFixed(1)}°F is dangerously low. Embryo development at risk.`,\n action: \"Check heat source immediately.\",\n bgClass: \"bg-red-50\",\n };\n case \"critical-high\":\n return {\n pillClass: \"pill-red\",\n pillLabel: \"Critical\",\n title: \"Temperature Too High\",\n message: `Temperature at ${alerts.temperature.current.toFixed(1)}°F is dangerously high. Risk of embryo damage.`,\n action: \"Reduce heat or improve ventilation immediately.\",\n bgClass: \"bg-red-50\",\n };\n case \"warning-low\":\n return {\n pillClass: \"pill-yellow\",\n pillLabel: \"Warning\",\n title: \"Temperature Low\",\n message: `Temperature at ${alerts.temperature.current.toFixed(1)}°F is below optimal range.`,\n action: \"Consider adjusting heat source.\",\n bgClass: \"bg-yellow-50\",\n };\n case \"warning-high\":\n return {\n pillClass: \"pill-yellow\",\n pillLabel: \"Warning\",\n title: \"Temperature High\",\n message: `Temperature at ${alerts.temperature.current.toFixed(1)}°F is above optimal range.`,\n action: \"Consider improving ventilation.\",\n bgClass: \"bg-yellow-50\",\n };\n default:\n return null;\n }\n };\n\n const alert = getMessage();\n if (!alert) return null;\n\n return (\n

\n {alert.pillLabel}\n

{alert.title}

{alert.message}

{alert.action}

\n\n {/* Temperature display */}\n

\n {alerts.temperature.current.toFixed(1)}°F\n

\n Current temp\n

\n );\n}\n",[],[293,300,307],{"_104":315,"_96":316,"_156":317,"_158":301,"_159":141,"_160":318,"_162":118,"_106":319,"_101":248,"_164":203,"_166":320,"_167":22,"_168":-5,"_169":321,"_99":322},"946b553c-f5cc-11f0-8ea6-42dde27851f2","App.tsx","3199d0ce-f5bc-11f0-aedd-42dde27851f2",82,["D",1768891946053],"/** @jsxImportSource https://esm.sh/react@18.2.0 */\nimport React, { useState, useEffect } from \"https://esm.sh/react@18.2.0\";\nimport { Header } from \"./Header.tsx\";\nimport { CurrentReadings } from \"./CurrentReadings.tsx\";\nimport { IncubationStatus } from \"./IncubationStatus.tsx\";\nimport { DailyTips } from \"./DailyTips.tsx\";\nimport { HistoricalChart } from \"./HistoricalChart.tsx\";\nimport { AlertBanner } from \"./AlertBanner.tsx\";\n\n// Types matching backend\ninterface SensorReading {\n id: number;\n deviceEui: string;\n timestamp: string;\n temperatureC: number;\n temperatureF: number;\n humidity: number;\n batteryVoltage: number;\n rssi?: number;\n snr?: number;\n}\n\ninterface IncubationStatusData {\n currentDay: number;\n daysRemaining: number;\n phase: \"incubation\" | \"lockdown\" | \"hatching\" | \"complete\";\n lockdownDate: string;\n hatchDate: string;\n startDate: string;\n progressPercent: number;\n}\n\ninterface AlertThresholds {\n temperature: {\n current: number;\n status: \"critical-low\" | \"warning-low\" | \"ideal\" | \"warning-high\" | \"critical-high\";\n };\n humidity: {\n current: number;\n target: { min: number; max: number };\n status: \"low\" | \"ideal\" | \"high\";\n };\n}\n\ninterface DailyTip {\n day: number;\n phase: string;\n tasks: string[];\n isSpecialDay: boolean;\n specialNote?: string;\n}\n\ninterface DashboardData {\n currentReading: SensorReading | null;\n incubationStatus: IncubationStatusData;\n alerts: AlertThresholds | null;\n recentReadings: SensorReading[];\n dailyTip: DailyTip;\n}\n\ndeclare global {\n interface Window {\n __INITIAL_DATA__?: DashboardData;\n }\n}\n\nexport function App() {\n const [data, setData] = useState(\n window.__INITIAL_DATA__ || null\n );\n const [loading, setLoading] = useState(!window.__INITIAL_DATA__);\n const [error, setError] = useState(null);\n\n // Fetch data on mount and every 60 seconds\n useEffect(() => {\n async function fetchData() {\n try {\n const [statusRes, readingsRes] = await Promise.all([\n fetch(\"/api/status\"),\n fetch(\"/api/readings?minutes=1440\"),\n ]);\n\n if (!statusRes.ok || !readingsRes.ok) {\n throw new Error(\"Failed to fetch data\");\n }\n\n const status = await statusRes.json();\n const recentReadings = await readingsRes.json();\n\n setData({\n ...status,\n recentReadings,\n });\n setError(null);\n } catch (err) {\n console.error(\"Failed to fetch data:\", err);\n setError(err instanceof Error ? err.message : \"Unknown error\");\n } finally {\n setLoading(false);\n }\n }\n\n if (!window.__INITIAL_DATA__) {\n fetchData();\n }\n\n const interval = setInterval(fetchData, 60000);\n return () => clearInterval(interval);\n }, []);\n\n if (loading) {\n return (\n

🥚

\n Loading incubator data...\n

\n );\n }\n\n if (error && !data) {\n return (\n

⚠️

Failed to load data

{error}

\n window.location.reload()}\n className=\"mt-6 px-6 py-3 bg-blue-500 hover:bg-blue-600 rounded-md font-semibold text-white transition-colors\"\n >\n Try Again\n \n

\n );\n }\n\n if (!data) {\n return (\n

📊

No data available

Waiting for sensor readings...

\n );\n }\n\n return (\n

\n\n {data.alerts && (\n \n )}\n\n

\n \n \n

\n\n

\n \n

\n\n \n

\n );\n}\n",[],[293,300,316],{"_104":324,"_96":325,"_156":326,"_158":301,"_159":141,"_160":327,"_162":118,"_106":328,"_101":194,"_164":203,"_166":329,"_167":22,"_168":-5,"_169":330,"_99":331},"2b53d090-f641-11f0-a61a-42dde27851f2","CurrentReadings.tsx","31b86278-f5bc-11f0-97e8-42dde27851f2",108,["D",1768942020847],"/** @jsxImportSource https://esm.sh/react@18.2.0 */\nimport React from \"https://esm.sh/react@18.2.0\";\nimport { CALIBRATION } from \"../../shared/constants.ts\";\n\ninterface SensorReading {\n temperatureC: number;\n temperatureF: number;\n humidity: number;\n batteryVoltage: number;\n rssi?: number;\n timestamp: string;\n}\n\ninterface AlertThresholds {\n temperature: {\n current: number;\n status: \"critical-low\" | \"warning-low\" | \"ideal\" | \"warning-high\" | \"critical-high\";\n };\n humidity: {\n current: number;\n target: { min: number; max: number };\n status: \"low\" | \"ideal\" | \"high\";\n };\n}\n\ninterface Props {\n reading: SensorReading | null;\n alerts: AlertThresholds | null;\n}\n\nexport function CurrentReadings({ reading, alerts }: Props) {\n if (!reading) {\n return (\n

Current Readings

📡

Waiting for sensor data...

\n Make sure your RAK7204 is configured\n

\n );\n }\n\n const tempStatus = alerts?.temperature.status || \"ideal\";\n const humidityTarget = alerts?.humidity.target || { min: 45, max: 55 };\n\n const getStatusPill = (status: string) => {\n switch (status) {\n case \"critical-low\":\n case \"critical-high\":\n return { pillClass: \"pill-red\", label: \"Critical\" };\n case \"warning-low\":\n case \"warning-high\":\n return { pillClass: \"pill-yellow\", label: \"Warning\" };\n default:\n return { pillClass: \"pill-green\", label: \"Ideal\" };\n }\n };\n\n const statusConfig = getStatusPill(tempStatus);\n\n const formatTime = (timestamp: string) => {\n const date = new Date(timestamp);\n return date.toLocaleTimeString(\"en-US\", {\n hour: \"2-digit\",\n minute: \"2-digit\",\n });\n };\n\n // Battery percentage (2.5V = 0%, 3.6V = 100%)\n const getBatteryPercent = (voltage: number) => {\n const min = 2.5;\n const max = 3.6;\n return Math.max(0, Math.min(100, ((voltage - min) / (max - min)) * 100));\n };\n\n const batteryPercent = getBatteryPercent(reading.batteryVoltage);\n const batteryColor = batteryPercent < 20 ? \"#ef4444\" : batteryPercent < 50 ? \"#eab308\" : \"#22c55e\";\n\n return (\n

Current Readings

\n {statusConfig.label}\n

\n\n

\n {/* Temperature (with calibration offset) */}\n

\n {(reading.temperatureF + CALIBRATION.temperatureF).toFixed(1)}°\n

\n {((reading.temperatureF + CALIBRATION.temperatureF - 32) * 5 / 9).toFixed(1)}°C\n

Temperature

Target: 101-102°F

\n\n {/* Humidity */}\n

\n {reading.humidity.toFixed(0)}%\n

Humidity

\n Target: {humidityTarget.min}-{humidityTarget.max}%\n

\n\n {/* Footer stats */}\n

\n {/* Battery gauge */}\n

\n \n {Math.round(batteryPercent)}%\n

\n {reading.rssi !== undefined && (\n

\n {reading.rssi} dBm\n

\n )}\n

\n {formatTime(reading.timestamp)}\n

\n );\n}\n",[],[293,300,325],{"_104":333,"_96":334,"_156":335,"_158":301,"_159":141,"_160":336,"_162":118,"_106":337,"_101":295,"_164":203,"_166":338,"_167":22,"_168":-5,"_169":339,"_99":340},"50cb2e98-f5cb-11f0-8e13-42dde27851f2","DailyTips.tsx","31a61230-f5bc-11f0-aedd-42dde27851f2",71,["D",1768891403102],"/** @jsxImportSource https://esm.sh/react@18.2.0 */\nimport React from \"https://esm.sh/react@18.2.0\";\n\ninterface DailyTip {\n day: number;\n phase: string;\n tasks: string[];\n isSpecialDay: boolean;\n specialNote?: string;\n}\n\ninterface Props {\n tip: DailyTip;\n}\n\nexport function DailyTips({ tip }: Props) {\n const showEgg = tip.phase === \"Hatch Day\" || tip.phase === \"Post-Hatch\";\n\n return (\n

\n Today's Tasks\n {tip.isSpecialDay && (\n Special Day\n )}\n

\n Day {tip.day} • {tip.phase} Phase\n {showEgg && 🐣}\n

\n\n {/* Special note banner */}\n {tip.specialNote && (\n

{tip.specialNote}

\n )}\n\n {/* Task list */}\n

\n \n \n {task}\n \n

\n\n {/* Phase-specific tips */}\n {tip.phase === \"Lockdown\" && (\n

\n 💡\n

\n Tip: Add a wet sponge or extra water to increase\n humidity. Opening the incubator can cause chicks to get stuck.\n

\n )}\n\n {tip.phase === \"Hatch Day\" && (\n

\n 💡\n

\n Tip: Hatching can take 12-24 hours from first pip.\n The struggle is necessary for development. Only intervene after 24+ hours with no progress.\n

\n )}\n

\n );\n}\n",[],[293,300,334],{"_104":342,"_96":343,"_156":344,"_158":301,"_159":141,"_160":345,"_162":118,"_106":346,"_101":187,"_164":203,"_166":347,"_167":22,"_168":-5,"_169":348,"_99":349},"80af6362-f5cc-11f0-a65d-42dde27851f2","Header.tsx","31c5ce40-f5bc-11f0-9ddc-42dde27851f2",78,["D",1768891912949],"/** @jsxImportSource https://esm.sh/react@18.2.0 */\nimport React from \"https://esm.sh/react@18.2.0\";\n\nexport function Header() {\n return (\n

🥚

\n Quail Incubator\n

\n \n Coturnix Quail • 17-Day Incubation\n

\n );\n}\n",[],[293,300,343],{"_104":351,"_96":352,"_156":353,"_158":301,"_159":141,"_160":354,"_162":118,"_106":355,"_101":187,"_164":203,"_166":356,"_167":22,"_168":-5,"_169":357,"_99":358},"340d470c-f641-11f0-aec4-42dde27851f2","HistoricalChart.tsx","31cbd4c0-f5bc-11f0-bc26-42dde27851f2",110,["D",1768942035491],"/** @jsxImportSource https://esm.sh/react@18.2.0 */\nimport React, { useEffect, useRef, useState } from \"https://esm.sh/react@18.2.0\";\nimport { CALIBRATION } from \"../../shared/constants.ts\";\n\ninterface SensorReading {\n timestamp: string;\n temperatureF: number;\n humidity: number;\n}\n\ninterface Props {\n readings: SensorReading[];\n}\n\ndeclare const Chart: any;\n\nexport function HistoricalChart({ readings }: Props) {\n const canvasRef = useRef(null);\n const chartRef = useRef(null);\n const [chartLoaded, setChartLoaded] = useState(false);\n const [timeRange, setTimeRange] = useState<\"6h\" | \"12h\" | \"24h\">(\"24h\");\n\n useEffect(() => {\n if (typeof Chart !== \"undefined\") {\n setChartLoaded(true);\n return;\n }\n\n const script = document.createElement(\"script\");\n script.src = \"https://cdn.jsdelivr.net/npm/chart.js@4.4.1/dist/chart.umd.min.js\";\n script.onload = () => setChartLoaded(true);\n document.head.appendChild(script);\n }, []);\n\n useEffect(() => {\n if (!chartLoaded || !canvasRef.current) return;\n\n const now = Date.now();\n const rangeMs = {\n \"6h\": 6 * 60 * 60 * 1000,\n \"12h\": 12 * 60 * 60 * 1000,\n \"24h\": 24 * 60 * 60 * 1000,\n };\n const cutoff = now - rangeMs[timeRange];\n\n const filteredReadings = readings.filter(\n (r) => new Date(r.timestamp).getTime() >= cutoff\n );\n\n const labels = filteredReadings.map((r) => {\n const date = new Date(r.timestamp);\n return date.toLocaleTimeString(\"en-US\", {\n hour: \"2-digit\",\n minute: \"2-digit\",\n });\n });\n\n const tempData = filteredReadings.map((r) => r.temperatureF + CALIBRATION.temperatureF);\n const humidityData = filteredReadings.map((r) => r.humidity);\n\n if (chartRef.current) {\n chartRef.current.data.labels = labels;\n chartRef.current.data.datasets[0].data = tempData;\n chartRef.current.data.datasets[1].data = humidityData;\n chartRef.current.update();\n } else {\n const ctx = canvasRef.current.getContext(\"2d\");\n chartRef.current = new Chart(ctx, {\n type: \"line\",\n data: {\n labels,\n datasets: [\n {\n label: \"Temperature (°F)\",\n data: tempData,\n borderColor: \"#3b82f6\",\n backgroundColor: \"rgba(59, 130, 246, 0.1)\",\n yAxisID: \"y\",\n tension: 0.4,\n pointRadius: 0,\n pointHoverRadius: 6,\n pointHoverBackgroundColor: \"#3b82f6\",\n borderWidth: 2,\n fill: true,\n },\n {\n label: \"Humidity (%)\",\n data: humidityData,\n borderColor: \"#94a3b8\",\n backgroundColor: \"rgba(148, 163, 184, 0.1)\",\n yAxisID: \"y1\",\n tension: 0.4,\n pointRadius: 0,\n pointHoverRadius: 6,\n pointHoverBackgroundColor: \"#94a3b8\",\n borderWidth: 2,\n fill: true,\n },\n ],\n },\n options: {\n responsive: true,\n maintainAspectRatio: false,\n interaction: {\n mode: \"index\",\n intersect: false,\n },\n plugins: {\n legend: {\n display: true,\n position: \"top\",\n align: \"end\",\n labels: {\n color: \"#64748b\",\n usePointStyle: true,\n pointStyle: \"circle\",\n padding: 20,\n font: { size: 12, family: \"Inter\" },\n },\n },\n tooltip: {\n backgroundColor: \"rgba(255, 255, 255, 0.95)\",\n titleColor: \"#1e293b\",\n bodyColor: \"#475569\",\n borderColor: \"#e2e8f0\",\n borderWidth: 1,\n padding: 12,\n cornerRadius: 6,\n displayColors: true,\n boxPadding: 6,\n },\n },\n scales: {\n x: {\n grid: { color: \"#f1f5f9\", drawBorder: false },\n ticks: { color: \"#64748b\", maxTicksLimit: 8, font: { size: 11 } },\n },\n y: {\n type: \"linear\",\n position: \"left\",\n min: 90,\n max: 115,\n grid: { color: \"#f1f5f9\", drawBorder: false },\n ticks: { color: \"#3b82f6\", font: { size: 11 } },\n title: {\n display: true,\n text: \"Temp (°F)\",\n color: \"#3b82f6\",\n font: { size: 12, weight: \"500\" },\n },\n },\n y1: {\n type: \"linear\",\n position: \"right\",\n min: 30,\n max: 90,\n grid: { drawOnChartArea: false, drawBorder: false },\n ticks: { color: \"#64748b\", font: { size: 11 } },\n title: {\n display: true,\n text: \"Humidity (%)\",\n color: \"#64748b\",\n font: { size: 12, weight: \"500\" },\n },\n },\n },\n },\n });\n }\n\n return () => {\n if (chartRef.current) {\n chartRef.current.destroy();\n chartRef.current = null;\n }\n };\n }, [chartLoaded, readings, timeRange]);\n\n if (readings.length === 0) {\n return (\n

Historical Data

📊

No historical data yet

\n Data will appear once readings are received\n

\n );\n }\n\n return (\n

Historical Data

\n {([\"6h\", \"12h\", \"24h\"] as const).map((range) => (\n setTimeRange(range)}\n className={`px-3 py-1.5 rounded text-sm font-medium transition-colors ${\n timeRange === range\n ? \"bg-blue-500 text-white\"\n : \"text-slate-600 hover:text-slate-900\"\n }`}\n >\n {range}\n \n ))}\n

\n {chartLoaded ? (\n

\n ) : (\n

\n Loading chart...\n

\n )}\n

\n );\n}\n",[],[293,300,352],{"_104":360,"_96":361,"_156":362,"_158":301,"_159":141,"_160":363,"_162":118,"_106":364,"_101":295,"_164":203,"_166":365,"_167":22,"_168":-5,"_169":366,"_99":367},"10b24c56-f5cb-11f0-93cd-42dde27851f2","IncubationStatus.tsx","31aa9314-f5bc-11f0-bf42-42dde27851f2",69,["D",1768891295562],"/** @jsxImportSource https://esm.sh/react@18.2.0 */\nimport React from \"https://esm.sh/react@18.2.0\";\n\ninterface IncubationStatusData {\n currentDay: number;\n daysRemaining: number;\n phase: \"incubation\" | \"lockdown\" | \"hatching\" | \"complete\";\n lockdownDate: string;\n hatchDate: string;\n startDate: string;\n progressPercent: number;\n}\n\ninterface Props {\n status: IncubationStatusData;\n}\n\nexport function IncubationStatus({ status }: Props) {\n const phaseLabels = {\n incubation: \"Incubation\",\n lockdown: \"Lockdown\",\n hatching: \"Hatching\",\n complete: \"Complete\",\n };\n\n const formatDate = (dateStr: string) => {\n return new Date(dateStr).toLocaleDateString(\"en-US\", {\n weekday: \"short\",\n month: \"short\",\n day: \"numeric\",\n });\n };\n\n return (\n

Incubation Progress

\n\n {/* Day counter */}\n

\n \n {status.currentDay}\n \n / 17\n

\n \n {phaseLabels[status.phase]} Phase\n \n

\n\n {/* Progress bar */}\n

\n \n

\n {/* Lockdown marker */}\n \n

\n\n {/* Key dates */}\n

Started

{formatDate(status.startDate)}

Lockdown

{formatDate(status.lockdownDate)}

Hatch

{formatDate(status.hatchDate)}

\n\n {/* Lockdown warning */}\n {status.phase === \"lockdown\" && (\n

\n Lockdown\n

\n Maintain 65-75% humidity. Do not open incubator.\n

\n )}\n\n {/* Countdown */}\n

\n {status.daysRemaining > 0 ? (\n

\n \n {status.daysRemaining}\n \n \n day{status.daysRemaining !== 1 ? \"s\" : \"\"} until hatch\n \n

\n ) : status.phase === \"hatching\" ? (\n

\n 🐣 Hatching time!\n

\n ) : (\n

Incubation complete

\n )}\n

\n );\n}\n",[],[293,300,361],[293,300],{"_104":370,"_96":371,"_156":372,"_158":294,"_159":141,"_160":373,"_162":118,"_106":374,"_101":161,"_164":178,"_166":375,"_167":22,"_168":-5,"_169":376,"_99":377},"b250d2ea-f5ca-11f0-a3a1-42dde27851f2","index.html","3195b9ee-f5bc-11f0-9ddc-42dde27851f2",62,["D",1768891137221],"\n\n\n \n \n Quail Incubator Monitor\n \n \n \n \n \n 🥚\">\n \n\n\n

\n \n\n\n",[],[293,371],{"_104":379,"_96":380,"_156":381,"_158":294,"_159":141,"_160":382,"_162":118,"_106":383,"_101":32,"_164":203,"_166":384,"_167":22,"_168":-5,"_169":385,"_99":386},"31b2708e-f5bc-11f0-a1cb-42dde27851f2","index.tsx","31b2714c-f5bc-11f0-a1cb-42dde27851f2",15,["D",1768884908404],"/** @jsxImportSource https://esm.sh/react@18.2.0 */\nimport React from \"https://esm.sh/react@18.2.0\";\nimport { createRoot } from \"https://esm.sh/react-dom@18.2.0/client\";\nimport { App } from \"./components/App.tsx\";\n\nconst root = createRoot(document.getElementById(\"root\")!);\nroot.render();\n",[],[293,380],[293],{"_104":389,"_96":390,"_156":391,"_158":-5,"_159":141,"_160":285,"_162":118,"_106":392,"_101":32,"_164":165,"_166":-5,"_167":22,"_168":-5,"_169":393,"_99":420},"3111a35c-f5bc-11f0-9a10-42dde27851f2","shared","3111a438-f5bc-11f0-9a10-42dde27851f2",["D",1768884907433],[394,402,411],{"_104":395,"_96":396,"_156":397,"_158":391,"_159":141,"_160":140,"_162":118,"_106":398,"_101":302,"_164":203,"_166":399,"_167":22,"_168":-5,"_169":400,"_99":401},"c54fc1c6-f642-11f0-a097-42dde27851f2","constants.ts","321f3430-f5bc-11f0-97e8-42dde27851f2",["D",1768942708696],"// Sensor calibration offsets\nexport const CALIBRATION = {\n temperatureF: -6.3, // Offset in Fahrenheit (RAK7204 BME680 reads high)\n};\n\n// Incubation configuration and thresholds\n\nexport const INCUBATION_CONFIG = {\n // Dates - Coturnix quail, 17-day incubation started January 19, 2026\n // Using Pacific midnight (UTC-8) = 08:00 UTC\n startDate: new Date(\"2026-01-19T08:00:00Z\"),\n totalDays: 17,\n lockdownStartDay: 15,\n\n // Temperature thresholds (Fahrenheit) - Still-air incubator\n // Allows ±2-3°F hysteresis for heater cycling\n temp: {\n idealMin: 101,\n idealMax: 102,\n warningMin: 98, // Allow 3°F below ideal before warning\n warningMax: 105, // Allow 3°F above ideal before warning\n criticalMin: 96, // 5°F below ideal = critical\n criticalMax: 107, // 5°F above ideal = critical\n },\n\n // Humidity thresholds (%)\n humidity: {\n incubation: { min: 45, max: 55 },\n lockdown: { min: 65, max: 75 },\n },\n\n // Alert rate limiting (milliseconds)\n alerts: {\n criticalCooldown: 5 * 60 * 1000, // 5 minutes\n warningCooldown: 30 * 60 * 1000, // 30 minutes\n },\n};\n\n// Temperature conversion helpers\nexport function celsiusToFahrenheit(c: number): number {\n return (c * 9) / 5 + 32;\n}\n\nexport function fahrenheitToCelsius(f: number): number {\n return ((f - 32) * 5) / 9;\n}\n\n// Table names for SQLite\nexport const TABLES = {\n readings: \"incubator_readings_v1\",\n alerts: \"incubator_alerts_v1\",\n config: \"incubator_config_v1\",\n};\n",[],[390,396],{"_104":403,"_96":404,"_156":405,"_158":391,"_159":141,"_160":406,"_162":118,"_106":407,"_101":32,"_164":203,"_166":408,"_167":22,"_168":-5,"_169":409,"_99":410},"32031322-f5bc-11f0-81d9-42dde27851f2","dailyTips.ts","320313ea-f5bc-11f0-81d9-42dde27851f2",28,["D",1768884909009],"// Day-by-day care instructions for Coturnix quail incubation\nimport type { DailyTip } from \"./types.ts\";\n\nconst DAILY_TIPS: Record> = {\n 1: {\n phase: \"Setup\",\n tasks: [\n \"Turn eggs 3-5 times daily (odd number preferred)\",\n \"Mark eggs with X and O on opposite sides to track turning\",\n \"Verify temperature is stable at 101-102°F\",\n \"Keep humidity at 45-55%\",\n ],\n isSpecialDay: true,\n specialNote: \"First day! Avoid opening incubator unnecessarily.\",\n },\n 2: {\n phase: \"Setup\",\n tasks: [\n \"Turn eggs 3-5 times daily\",\n \"Monitor temperature stability\",\n \"Check humidity levels\",\n ],\n isSpecialDay: false,\n },\n 3: {\n phase: \"Setup\",\n tasks: [\n \"Turn eggs 3-5 times daily\",\n \"Embryo development beginning - keep conditions stable\",\n ],\n isSpecialDay: false,\n },\n 4: {\n phase: \"Early Development\",\n tasks: [\n \"Turn eggs 3-5 times daily\",\n \"Prepare for first candling tomorrow\",\n ],\n isSpecialDay: false,\n },\n 5: {\n phase: \"Early Development\",\n tasks: [\n \"Turn eggs 3-5 times daily\",\n \"CANDLE EGGS: Look for veins and dark spot (embryo)\",\n \"Remove clear eggs (infertile) or eggs with blood rings\",\n ],\n isSpecialDay: true,\n specialNote: \"First candling day! Grocery store eggs may have low fertility - don't be discouraged.\",\n },\n 6: {\n phase: \"Early Development\",\n tasks: [\n \"Turn eggs 3-5 times daily\",\n \"Fertile eggs should show growing vein networks\",\n ],\n isSpecialDay: false,\n },\n 7: {\n phase: \"Early Development\",\n tasks: [\n \"Turn eggs 3-5 times daily\",\n \"One week complete! Embryos developing well.\",\n ],\n isSpecialDay: false,\n },\n 8: {\n phase: \"Mid Development\",\n tasks: [\n \"Turn eggs 3-5 times daily\",\n \"Air cell at blunt end should be visible\",\n ],\n isSpecialDay: false,\n },\n 9: {\n phase: \"Mid Development\",\n tasks: [\n \"Turn eggs 3-5 times daily\",\n \"Embryo growing rapidly\",\n ],\n isSpecialDay: false,\n },\n 10: {\n phase: \"Mid Development\",\n tasks: [\n \"Turn eggs 3-5 times daily\",\n \"CANDLE EGGS: Embryo should fill ~1/3 of egg\",\n \"Air cell should be growing larger\",\n ],\n isSpecialDay: true,\n specialNote: \"Second candling day! Remove any eggs that stopped developing.\",\n },\n 11: {\n phase: \"Late Development\",\n tasks: [\n \"Turn eggs 3-5 times daily\",\n \"Embryo filling more of the egg\",\n ],\n isSpecialDay: false,\n },\n 12: {\n phase: \"Late Development\",\n tasks: [\n \"Turn eggs 3-5 times daily\",\n \"Prepare water/sponges for humidity increase at lockdown\",\n ],\n isSpecialDay: false,\n },\n 13: {\n phase: \"Late Development\",\n tasks: [\n \"Turn eggs 3-5 times daily\",\n \"Check incubator seal for lockdown\",\n ],\n isSpecialDay: false,\n },\n 14: {\n phase: \"Late Development\",\n tasks: [\n \"Turn eggs 3-5 times daily\",\n \"FINAL CANDLE: Embryo fills most of egg, large air cell\",\n \"Tomorrow is LOCKDOWN - prepare now!\",\n ],\n isSpecialDay: true,\n specialNote: \"Last candling before lockdown! Have humidity supplies ready.\",\n },\n 15: {\n phase: \"Lockdown\",\n tasks: [\n \"STOP TURNING - chicks are positioning for hatch\",\n \"INCREASE HUMIDITY to 65-75%\",\n \"Add water channels or wet sponges\",\n \"DO NOT open incubator from now on\",\n ],\n isSpecialDay: true,\n specialNote: \"LOCKDOWN BEGINS! Opening the incubator can shrink-wrap chicks.\",\n },\n 16: {\n phase: \"Lockdown\",\n tasks: [\n \"Maintain 65-75% humidity\",\n \"DO NOT open incubator\",\n \"Watch for pipping (small cracks in shells)\",\n \"Chicks may start internal pip (you won't see it)\",\n ],\n isSpecialDay: false,\n },\n 17: {\n phase: \"Hatch Day\",\n tasks: [\n \"Maintain humidity - critical!\",\n \"Watch for external pips and zipping\",\n \"Do NOT help chicks out of shells\",\n \"Hatching can take 24+ hours per chick\",\n ],\n isSpecialDay: true,\n specialNote: \"HATCH DAY! Be patient - the struggle to hatch is necessary for chick development.\",\n },\n 18: {\n phase: \"Post-Hatch\",\n tasks: [\n \"Leave chicks in incubator until fluffy and dry\",\n \"Move dry chicks to brooder (95°F)\",\n \"Provide water with marbles (prevents drowning)\",\n \"Offer chick starter feed\",\n ],\n isSpecialDay: true,\n specialNote: \"Chicks can survive 48-72 hours without food/water after hatching (absorb yolk).\",\n },\n};\n\nexport function getDailyTip(day: number): DailyTip {\n // Handle days beyond our guide\n if (day < 1) {\n return {\n day: 0,\n phase: \"Pre-incubation\",\n tasks: [\"Incubation hasn't started yet\"],\n isSpecialDay: false,\n };\n }\n\n if (day > 18) {\n return {\n day,\n phase: \"Complete\",\n tasks: [\n \"Incubation complete!\",\n \"Care for any hatched chicks in brooder\",\n \"Brooder temp: Week 1 = 95°F, reduce 5°F each week\",\n ],\n isSpecialDay: false,\n };\n }\n\n const tip = DAILY_TIPS[day];\n return {\n day,\n ...tip,\n };\n}\n\nexport function getPhaseForDay(day: number): string {\n if (day < 1) return \"Pre-incubation\";\n if (day <= 3) return \"Setup\";\n if (day <= 7) return \"Early Development\";\n if (day <= 10) return \"Mid Development\";\n if (day <= 14) return \"Late Development\";\n if (day <= 17) return \"Lockdown\";\n return \"Complete\";\n}\n",[],[390,404],{"_104":412,"_96":413,"_156":414,"_158":391,"_159":141,"_160":415,"_162":118,"_106":416,"_101":266,"_164":203,"_166":417,"_167":22,"_168":-5,"_169":418,"_99":419},"15f6b74c-f62a-11f0-a71f-42dde27851f2","types.ts","3205ac72-f5bc-11f0-97e8-42dde27851f2",90,["D",1768932106596],"// Shared TypeScript interfaces for the Incubator Tracker\n\nexport interface SensorReading {\n id: number;\n deviceEui: string;\n timestamp: string;\n temperatureC: number;\n temperatureF: number;\n humidity: number;\n batteryVoltage: number;\n externalTempC?: number;\n rssi?: number;\n snr?: number;\n}\n\nexport interface IncubationStatus {\n currentDay: number;\n daysRemaining: number;\n phase: \"incubation\" | \"lockdown\" | \"hatching\" | \"complete\";\n lockdownDate: string;\n hatchDate: string;\n startDate: string;\n progressPercent: number;\n}\n\nexport interface AlertThresholds {\n temperature: {\n current: number;\n status: \"critical-low\" | \"warning-low\" | \"ideal\" | \"warning-high\" | \"critical-high\";\n };\n humidity: {\n current: number;\n target: { min: number; max: number };\n status: \"low\" | \"ideal\" | \"high\";\n };\n}\n\nexport interface DailyTip {\n day: number;\n phase: string;\n tasks: string[];\n isSpecialDay: boolean;\n specialNote?: string;\n}\n\nexport interface DashboardData {\n currentReading: SensorReading | null;\n incubationStatus: IncubationStatus;\n alerts: AlertThresholds | null;\n recentReadings: SensorReading[];\n dailyTip: DailyTip;\n}\n\n// ChirpStack webhook payload types\nexport interface ChirpStackUplinkEvent {\n deduplicationId: string;\n time: string;\n deviceInfo: {\n tenantId: string;\n tenantName: string;\n applicationId: string;\n applicationName: string;\n deviceProfileId: string;\n deviceProfileName: string;\n deviceName: string;\n devEui: string;\n tags: Record;\n };\n devAddr: string;\n adr: boolean;\n dr: number;\n fCnt: number;\n fPort: number;\n confirmed: boolean;\n data: string; // Base64-encoded payload\n object?: Record;\n rxInfo: Array<{\n gatewayId: string;\n uplinkId: number;\n rssi: number;\n snr: number;\n channel: number;\n location?: {\n latitude: number;\n longitude: number;\n altitude: number;\n };\n context: string;\n metadata: Record;\n crcStatus: string;\n }>;\n txInfo: {\n frequency: number;\n modulation: {\n lora?: {\n bandwidth: number;\n spreadingFactor: number;\n codeRate: string;\n };\n };\n };\n}\n\nexport interface DecodedRAK7204Payload {\n batteryVoltage: number;\n temperatureCelsius: number;\n humidity: number;\n pressure?: number; // hPa\n gasResistance?: number; // kΩ\n}\n",[],[390,413],[390],{"_104":422,"_96":423,"_156":424,"_158":-5,"_159":141,"_160":425,"_162":118,"_106":426,"_101":32,"_164":178,"_166":427,"_167":22,"_168":-5,"_169":428,"_99":429},"322a1fbc-f5bc-11f0-97e8-42dde27851f2",".vtignore","322a2084-f5bc-11f0-97e8-42dde27851f2",33,["D",1768884909238],".git\n.vscode\n.cursorrules\n.DS_Store\nnode_modules\nvendor",[],[423],{"_104":431,"_96":432,"_156":433,"_158":-5,"_159":141,"_160":434,"_162":118,"_106":435,"_101":32,"_164":178,"_166":436,"_167":22,"_168":-5,"_169":437,"_99":438},"3224dd4a-f5bc-11f0-81d9-42dde27851f2","AGENTS.md","3224de1c-f5bc-11f0-81d9-42dde27851f2",32,["D",1768884909201],"You are an advanced assistant specialized in generating Val Town code.\n\n## Core Guidelines\n\n- Ask clarifying questions when requirements are ambiguous\n- Provide complete, functional solutions rather than skeleton implementations\n- Test your logic against edge cases before presenting the final solution\n- Ensure all code follows Val Town's specific platform requirements\n- If a section of code that you're working on is getting too complex, consider refactoring it into subcomponents\n\n## Code Standards\n\n- Generate code in TypeScript or TSX\n- Add appropriate TypeScript types and interfaces for all data structures\n- Prefer official SDKs or libraries than writing API calls directly\n- Ask the user to supply API or library documentation if you are at all unsure about it\n- **Never bake in secrets into the code** - always use environment variables\n- Include comments explaining complex logic (avoid commenting obvious operations)\n- Follow modern ES6+ conventions and functional programming practices if possible\n\n## Types of triggers\n\n### 1. HTTP Trigger\n\n- Create web APIs and endpoints\n- Handle HTTP requests and responses\n- Example structure:\n\n```ts\nexport default async function (req: Request) {\n return new Response(\"Hello World\");\n}\n```\n\nFiles that are HTTP triggers have http in their name like `foobar.http.tsx`\n\n### 2. Cron Triggers\n\n- Run on a schedule\n- Use cron expressions for timing\n- Example structure:\n\n```ts\nexport default async function () {\n // Scheduled task code\n}\n```\n\nFiles that are Cron triggers have cron in their name like `foobar.cron.tsx`\n\n### 3. Email Triggers\n\n- Process incoming emails\n- Handle email-based workflows\n- Example structure:\n\n```ts\nexport default async function (email: Email) {\n // Process email\n}\n```\n\nFiles that are Email triggers have email in their name like `foobar.email.tsx`\n\n\n## Val Town Standard Libraries\n\nVal Town provides several hosted services and utility functions.\n\n### Blob Storage\n\n```ts\nimport { blob } from \"https://esm.town/v/std/blob\";\nawait blob.setJSON(\"myKey\", { hello: \"world\" });\nlet blobDemo = await blob.getJSON(\"myKey\");\nlet appKeys = await blob.list(\"app_\");\nawait blob.delete(\"myKey\");\n```\n\n### SQLite\n\n```ts\nimport { sqlite } from \"https://esm.town/v/stevekrouse/sqlite\";\nconst TABLE_NAME = 'todo_app_users_2';\n// Create table - do this before usage and change table name when modifying schema\nawait sqlite.execute(`CREATE TABLE IF NOT EXISTS ${TABLE_NAME} (\n id INTEGER PRIMARY KEY AUTOINCREMENT,\n name TEXT NOT NULL\n)`);\n// Query data\nconst result = await sqlite.execute(`SELECT * FROM ${TABLE_NAME} WHERE id = ?`, [1]);\n```\n\nNote: When changing a SQLite table's schema, change the table's name (e.g., add _2 or _3) to create a fresh table.\n\n### OpenAI\n\n```ts\nimport { OpenAI } from \"https://esm.town/v/std/openai\";\nconst openai = new OpenAI();\nconst completion = await openai.chat.completions.create({\n messages: [\n { role: \"user\", content: \"Say hello in a creative way\" },\n ],\n model: \"gpt-4o-mini\",\n max_tokens: 30,\n});\n```\n\n### Email\n\n```ts\nimport { email } from \"https://esm.town/v/std/email\";\n// By default emails the owner of the val\nawait email({ \n subject: \"Hi\", \n text: \"Hi\", \n html: \"

Hi

\"\n});\n```\n\n## Val Town Utility Functions\n\nVal Town provides several utility functions to help with common project tasks.\n\n### Importing Utilities\n\nAlways import utilities with version pins to avoid breaking changes:\n\n```ts\nimport { parseProject, readFile, serveFile } from \"https://esm.town/v/std/utils@85-main/index.ts\";\n```\n\n### Available Utilities\n\n\n#### **serveFile** - Serve project files with proper content types\n\nFor example, in Hono:\n\n```ts\n// serve all files in frontend/ and shared/\napp.get(\"/frontend/*\", c => serveFile(c.req.path, import.meta.url));\napp.get(\"/shared/*\", c => serveFile(c.req.path, import.meta.url));\n```\n\n#### **readFile** - Read files from within the project:\n\n```ts\n// Read a file from the project\nconst fileContent = await readFile(\"/frontend/index.html\", import.meta.url);\n```\n\n#### **listFiles** - List all files in the project\n\n```ts\nconst files = await listFiles(import.meta.url);\n```\n\n#### **parseProject** - Extract information about the current project from import.meta.url\n\nThis is useful for including info for linking back to a val, ie in \"view source\" urls:\n\n```ts\nconst projectVal = parseProject(import.meta.url);\nconsole.log(projectVal.username); // Owner of the project\nconsole.log(projectVal.name); // Project name\nconsole.log(projectVal.version); // Version number\nconsole.log(projectVal.branch); // Branch name\nconsole.log(projectVal.links.self.project); // URL to the project page\n```\n\nHowever, it's *extremely importing* to note that `parseProject` and other Standard Library utilities ONLY RUN ON THE SERVER.\nIf you need access to this data on the client, run it in the server and pass it to the client by splicing it into the HTML page\nor by making an API request for it.\n\n## Val Town Platform Specifics\n\n- **Redirects:** Use `return new Response(null, { status: 302, headers: { Location: \"/place/to/redirect\" }})` instead of `Response.redirect` which is broken\n- **Images:** Avoid external images or base64 images. Use emojis, unicode symbols, or icon fonts/libraries instead\n- **AI Image:** To inline generate an AI image use: `

`\n- **Storage:** DO NOT use the Deno KV module for storage\n- **Browser APIs:** DO NOT use the `alert()`, `prompt()`, or `confirm()` methods\n- **Weather Data:** Use open-meteo for weather data (doesn't require API keys) unless otherwise specified\n- **View Source:** Add a view source link by importing & using `import.meta.url.replace(\"ems.sh\", \"val.town)\"` (or passing this data to the client) and include `target=\"_top\"` attribute\n- **Error Debugging:** Add `` to HTML to capture client-side errors\n- **Error Handling:** Only use try...catch when there's a clear local resolution; Avoid catches that merely log or return 500s. Let errors bubble up with full context\n- **Environment Variables:** Use `Deno.env.get('keyname')` when you need to, but generally prefer APIs that don't require keys\n- **Imports:** Use `https://esm.sh` for npm and Deno dependencies to ensure compatibility on server and browser\n- **Storage Strategy:** Only use backend storage if explicitly required; prefer simple static client-side sites\n- **React Configuration:** When using React libraries, pin versions with `?deps=react@18.2.0,react-dom@18.2.0` and start the file with `/** @jsxImportSource https://esm.sh/react@18.2.0 */`\n- Ensure all React dependencies and sub-dependencies are pinned to the same version\n- **Styling:** Default to using TailwindCSS via `` unless otherwise specified\n\n## Project Structure and Design Patterns\n\n### Recommended Directory Structure\n```\n├── backend/\n│ ├── database/\n│ │ ├── migrations.ts # Schema definitions\n│ │ ├── queries.ts # DB query functions\n│ │ └── README.md\n│ └── routes/ # Route modules\n│ ├── [route].ts\n│ └── static.ts # Static file serving\n│ ├── index.ts # Main entry point\n│ └── README.md\n├── frontend/\n│ ├── components/\n│ │ ├── App.tsx\n│ │ └── [Component].tsx\n│ ├── favicon.svg\n│ ├── index.html # Main HTML template\n│ ├── index.tsx # Frontend JS entry point\n│ ├── README.md\n│ └── style.css\n├── README.md\n└── shared/\n ├── README.md\n └── utils.ts # Shared types and functions\n```\n\n### Backend (Hono) Best Practices\n\n- Hono is the recommended API framework\n- Main entry point should be `backend/index.ts`\n- **Static asset serving:** Use the utility functions to read and serve project files:\n ```ts\n import { readFile, serveFile } from \"https://esm.town/v/std/utils@85-main/index.ts\";\n \n // serve all files in frontend/ and shared/\n app.get(\"/frontend/*\", c => serveFile(c.req.path, import.meta.url));\n app.get(\"/shared/*\", c => serveFile(c.req.path, import.meta.url));\n \n // For index.html, often you'll want to bootstrap with initial data\n app.get(\"/\", async c => {\n let html = await readFile(\"/frontend/index.html\", import.meta.url);\n \n // Inject data to avoid extra round-trips\n const initialData = await fetchInitialData();\n const dataScript = ``;\n \n html = html.replace(\"\", `${dataScript}`);\n return c.html(html);\n });\n ```\n- Create RESTful API routes for CRUD operations\n- Always include this snippet at the top-level Hono app to re-throwing errors to see full stack traces:\n ```ts\n // Unwrap Hono errors to see original error details\n app.onError((err, c) => {\n throw err;\n });\n ```\n\n### Database Patterns\n- Run migrations on startup or comment out for performance\n- Change table names when modifying schemas rather than altering\n- Export clear query functions with proper TypeScript typing\n\n## Common Gotchas and Solutions\n\n1. **Environment Limitations:** \n - Val Town runs on Deno in a serverless context, not Node.js\n - Code in `shared/` must work in both frontend and backend environments\n - Cannot use `Deno` keyword in shared code\n - Use `https://esm.sh` for imports that work in both environments\n\n2. **SQLite Peculiarities:**\n - Limited support for ALTER TABLE operations\n - Create new tables with updated schemas and copy data when needed\n - Always run table creation before querying\n\n3. **React Configuration:**\n - All React dependencies must be pinned to 18.2.0\n - Always include `@jsxImportSource https://esm.sh/react@18.2.0` at the top of React files\n - Rendering issues often come from mismatched React versions\n\n4. **File Handling:**\n - Val Town only supports text files, not binary\n - Use the provided utilities to read files across branches and forks\n - For files in the project, use `readFile` helpers\n\n5. **API Design:**\n - `fetch` handler is the entry point for HTTP vals\n - Run the Hono app with `export default app.fetch // This is the entry point for HTTP vals`\n\n",[],[432],{"_104":440,"_96":441,"_156":442,"_158":-5,"_159":141,"_160":443,"_162":118,"_106":444,"_101":32,"_164":178,"_166":445,"_167":22,"_168":-5,"_169":446,"_99":447},"31cfa0dc-f5bc-11f0-920d-42dde27851f2","deno.json","31cfa1ae-f5bc-11f0-920d-42dde27851f2",19,["D",1768884908674],"{\n \"$schema\": \"https://raw.githubusercontent.com/denoland/deno/98f62cee78e85bfc47c62ed703777c6bc8794f1c/cli/schemas/config-file.v1.json\",\n \"lock\": false,\n \"compilerOptions\": {\n \"noImplicitAny\": false,\n \"strict\": true,\n \"types\": [\"https://www.val.town/types/valtown.d.ts\"],\n \"lib\": [\n \"dom\",\n \"dom.iterable\",\n \"dom.asynciterable\",\n \"deno.ns\",\n \"deno.unstable\"\n ]\n },\n \"lint\": {\n \"include\": [\"deno:/https/esm.town/**/*\"],\n \"rules\": {\n \"exclude\": [\"no-explicit-any\"]\n }\n },\n \"node_modules_dir\": false,\n \"experimental\": {\n \"unstable-node-globals\": true,\n \"unstable-temporal\": true,\n \"unstable-worker-options\": true,\n \"unstable-sloppy-imports\": true\n }\n}",[],[441],"files",[153,171,183,190,197,207,217,224,233,244,251,260,270,280,291,298,305,314,323,332,341,350,359,369,378,388,394,402,411,421,430,439],"counts",{"_452":32,"_453":266,"_454":32,"_455":456,"_459":460},"pulls","branches","forks","envVars",{"_457":32,"_458":32},"count","emptyCount","connections",{"_457":32,"_461":32},"unfilledCount","contents",[],{"_104":172,"_96":173,"_156":174,"_158":157,"_159":141,"_160":175,"_162":118,"_106":465,"_101":177,"_164":178,"_166":179,"_167":22,"_168":-5,"_99":466},["D",1768932503308],[155,173],"upstreamProject","upstreamBranch","emptyEnvVars","isNew","flags",[],"routes/_app.x.$handle.$name.branch.$branch.history_.$",{"_94":95,"_96":97,"_98":44,"_99":100,"_102":475,"_178":480,"_483":484,"_543":544,"_558":-7,"_559":32,"_560":22},{"_104":105,"_96":97,"_106":476,"_108":-5,"_109":22,"_110":111,"_112":-5,"_113":-5,"_14":114,"_115":116,"_117":118,"_119":-5,"_120":-5,"_121":32,"_16":122,"_123":124,"_125":124,"_126":127,"_128":127,"_129":127,"_130":124,"_131":124,"_23":477,"_135":478,"_138":479,"_150":22},["D",1768883246417],{"_94":95,"_133":134},{"_94":95,"_137":134,"_14":114},{"_101":140,"_96":44,"_104":141,"_142":105,"_143":-5,"_144":-5,"_145":-5,"_146":-5,"_147":-5,"_148":97,"_149":95},{"_104":172,"_96":173,"_156":174,"_158":157,"_159":141,"_160":175,"_162":118,"_106":481,"_101":177,"_164":178,"_166":179,"_167":22,"_168":-5,"_99":482},["D",1768932503308],[155,173],"history",[485,487,493,498,503,508,513,518,523,528,533,538],{"_104":172,"_159":141,"_156":174,"_96":173,"_166":179,"_164":178,"_101":177,"_158":157,"_106":486,"_160":175,"_168":-5},["D",1768932503308],{"_104":488,"_159":141,"_156":174,"_96":173,"_166":489,"_164":178,"_101":490,"_158":157,"_106":491,"_160":492,"_168":-5},"f8f0922a-f62a-11f0-92cd-42dde27851f2","{\n \"permissions\": {\n \"allow\": [\n \"WebSearch\",\n \"WebFetch(domain:www.chirpstack.io)\",\n \"WebFetch(domain:gist.github.com)\",\n \"Bash(vt push)\",\n \"Bash(curl:*)\",\n \"Bash(vt status:*)\",\n \"Bash(vt --help:*)\",\n \"Bash(vt browse:*)\",\n \"WebFetch(domain:www.val.town)\",\n \"WebFetch(domain:docs.val.town)\",\n \"Bash(vt tail:*)\",\n \"Bash(timeout 10 vt tail:*)\",\n \"Bash(python3:*)\",\n \"Bash(deno check:*)\",\n \"Bash(vt pull:*)\",\n \"Bash(claude mcp add:*)\",\n \"Bash(vt list:*)\",\n \"WebFetch(domain:docs.rakwireless.com)\",\n \"WebFetch(domain:forum.rakwireless.com)\"\n ]\n }\n}\n",10,["D",1768932487396],95,{"_104":494,"_159":141,"_156":174,"_96":173,"_166":495,"_164":178,"_101":248,"_158":157,"_106":496,"_160":497,"_168":-5},"f848f412-f629-11f0-b711-42dde27851f2","{\n \"permissions\": {\n \"allow\": [\n \"WebSearch\",\n \"WebFetch(domain:www.chirpstack.io)\",\n \"WebFetch(domain:gist.github.com)\",\n \"Bash(vt push)\",\n \"Bash(curl:*)\",\n \"Bash(vt status:*)\",\n \"Bash(vt --help:*)\",\n \"Bash(vt browse:*)\",\n \"WebFetch(domain:www.val.town)\",\n \"WebFetch(domain:docs.val.town)\",\n \"Bash(vt tail:*)\",\n \"Bash(timeout 10 vt tail:*)\",\n \"Bash(python3:*)\",\n \"Bash(deno check:*)\",\n \"Bash(vt pull:*)\",\n \"Bash(claude mcp add:*)\",\n \"Bash(vt list:*)\",\n \"WebFetch(domain:docs.rakwireless.com)\"\n ]\n }\n}\n",["D",1768932056802],89,{"_104":499,"_159":141,"_156":174,"_96":173,"_166":500,"_164":178,"_101":221,"_158":157,"_106":501,"_160":502,"_168":-5},"8fc1b3cc-f5cd-11f0-9e32-42dde27851f2","{\n \"permissions\": {\n \"allow\": [\n \"WebSearch\",\n \"WebFetch(domain:www.chirpstack.io)\",\n \"WebFetch(domain:gist.github.com)\",\n \"Bash(vt push)\",\n \"Bash(curl:*)\",\n \"Bash(vt status:*)\",\n \"Bash(vt --help:*)\",\n \"Bash(vt browse:*)\",\n \"WebFetch(domain:www.val.town)\",\n \"WebFetch(domain:docs.val.town)\",\n \"Bash(vt tail:*)\",\n \"Bash(timeout 10 vt tail:*)\",\n \"Bash(python3:*)\",\n \"Bash(deno check:*)\",\n \"Bash(vt pull:*)\",\n \"Bash(claude mcp add:*)\",\n \"Bash(vt list:*)\"\n ]\n }\n}\n",["D",1768892367707],86,{"_104":504,"_159":141,"_156":174,"_96":173,"_166":505,"_164":178,"_101":194,"_158":157,"_106":506,"_160":507,"_168":-5},"9b42f018-f5cc-11f0-89e7-42dde27851f2","{\n \"permissions\": {\n \"allow\": [\n \"WebSearch\",\n \"WebFetch(domain:www.chirpstack.io)\",\n \"WebFetch(domain:gist.github.com)\",\n \"Bash(vt push)\",\n \"Bash(curl:*)\",\n \"Bash(vt status:*)\",\n \"Bash(vt --help:*)\",\n \"Bash(vt browse:*)\",\n \"WebFetch(domain:www.val.town)\",\n \"WebFetch(domain:docs.val.town)\",\n \"Bash(vt tail:*)\",\n \"Bash(timeout 10 vt tail:*)\",\n \"Bash(python3:*)\",\n \"Bash(deno check:*)\",\n \"Bash(vt pull:*)\",\n \"Bash(claude mcp add:*)\"\n ]\n }\n}\n",["D",1768891957535],83,{"_104":509,"_159":141,"_156":174,"_96":173,"_166":510,"_164":178,"_101":302,"_158":157,"_106":511,"_160":512,"_168":-5},"b57d1dec-f5cb-11f0-8ebc-42dde27851f2","{\n \"permissions\": {\n \"allow\": [\n \"WebSearch\",\n \"WebFetch(domain:www.chirpstack.io)\",\n \"WebFetch(domain:gist.github.com)\",\n \"Bash(vt push)\",\n \"Bash(curl:*)\",\n \"Bash(vt status:*)\",\n \"Bash(vt --help:*)\",\n \"Bash(vt browse:*)\",\n \"WebFetch(domain:www.val.town)\",\n \"WebFetch(domain:docs.val.town)\",\n \"Bash(vt tail:*)\",\n \"Bash(timeout 10 vt tail:*)\",\n \"Bash(python3:*)\",\n \"Bash(deno check:*)\",\n \"Bash(vt pull:*)\"\n ]\n }\n}\n",["D",1768891572031],74,{"_104":514,"_159":141,"_156":174,"_96":173,"_166":515,"_164":178,"_101":285,"_158":157,"_106":516,"_160":517,"_168":-5},"9027ffb2-f5cb-11f0-9f75-42dde27851f2","{\n \"permissions\": {\n \"allow\": [\n \"WebSearch\",\n \"WebFetch(domain:www.chirpstack.io)\",\n \"WebFetch(domain:gist.github.com)\",\n \"Bash(vt push)\",\n \"Bash(curl:*)\",\n \"Bash(vt status:*)\",\n \"Bash(vt --help:*)\",\n \"Bash(vt browse:*)\",\n \"WebFetch(domain:www.val.town)\",\n \"WebFetch(domain:docs.val.town)\",\n \"Bash(vt tail:*)\",\n \"Bash(timeout 10 vt tail:*)\",\n \"Bash(python3:*)\",\n \"Bash(deno check:*)\"\n ]\n }\n}\n",["D",1768891509407],73,{"_104":519,"_159":141,"_156":174,"_96":173,"_166":520,"_164":178,"_101":187,"_158":157,"_106":521,"_160":522,"_168":-5},"0285e1ae-f5c3-11f0-9403-42dde27851f2","{\n \"permissions\": {\n \"allow\": [\n \"WebSearch\",\n \"WebFetch(domain:www.chirpstack.io)\",\n \"WebFetch(domain:gist.github.com)\",\n \"Bash(vt push)\",\n \"Bash(curl:*)\",\n \"Bash(vt status:*)\",\n \"Bash(vt --help:*)\",\n \"Bash(vt browse:*)\",\n \"WebFetch(domain:www.val.town)\",\n \"WebFetch(domain:docs.val.town)\",\n \"Bash(vt tail:*)\",\n \"Bash(timeout 10 vt tail:*)\",\n \"Bash(python3:*)\"\n ]\n }\n}\n",["D",1768887835805],50,{"_104":524,"_159":141,"_156":174,"_96":173,"_166":525,"_164":178,"_101":161,"_158":157,"_106":526,"_160":527,"_168":-5},"887f3734-f5c2-11f0-9fdb-42dde27851f2","{\n \"permissions\": {\n \"allow\": [\n \"WebSearch\",\n \"WebFetch(domain:www.chirpstack.io)\",\n \"WebFetch(domain:gist.github.com)\",\n \"Bash(vt push)\",\n \"Bash(curl:*)\",\n \"Bash(vt status:*)\",\n \"Bash(vt --help:*)\",\n \"Bash(vt browse:*)\",\n \"WebFetch(domain:www.val.town)\",\n \"WebFetch(domain:docs.val.town)\",\n \"Bash(vt tail:*)\",\n \"Bash(timeout 10 vt tail:*)\"\n ]\n }\n}\n",["D",1768887631083],47,{"_104":529,"_159":141,"_156":174,"_96":173,"_166":530,"_164":178,"_101":295,"_158":157,"_106":531,"_160":532,"_168":-5},"61afd0aa-f5bd-11f0-a29a-42dde27851f2","{\n \"permissions\": {\n \"allow\": [\n \"WebSearch\",\n \"WebFetch(domain:www.chirpstack.io)\",\n \"WebFetch(domain:gist.github.com)\",\n \"Bash(vt push)\",\n \"Bash(curl:*)\",\n \"Bash(vt status:*)\",\n \"Bash(vt --help:*)\",\n \"Bash(vt browse:*)\",\n \"WebFetch(domain:www.val.town)\"\n ]\n }\n}\n",["D",1768885418494],45,{"_104":534,"_159":141,"_156":174,"_96":173,"_166":535,"_164":178,"_101":266,"_158":157,"_106":536,"_160":537,"_168":-5},"4e79ddf6-f5bc-11f0-bb7a-42dde27851f2","{\n \"permissions\": {\n \"allow\": [\n \"WebSearch\",\n \"WebFetch(domain:www.chirpstack.io)\",\n \"WebFetch(domain:gist.github.com)\",\n \"Bash(vt push)\",\n \"Bash(curl:*)\"\n ]\n }\n}\n",["D",1768884956764],35,{"_104":539,"_159":141,"_156":174,"_96":173,"_166":540,"_164":178,"_101":32,"_158":157,"_106":541,"_160":542,"_168":-5},"31df697c-f5bc-11f0-97e8-42dde27851f2","{\n \"permissions\": {\n \"allow\": [\n \"WebSearch\",\n \"WebFetch(domain:www.chirpstack.io)\",\n \"WebFetch(domain:gist.github.com)\",\n \"Bash(vt push)\"\n ]\n }\n}\n",["D",1768884908706],21,"versions",[545,547,548,549,550,551,552,553,554,555,556,557],{"_178":485,"_546":487},"previous",{"_178":487,"_546":493},{"_178":493,"_546":498},{"_178":498,"_546":503},{"_178":503,"_546":508},{"_178":508,"_546":513},{"_178":513,"_546":518},{"_178":518,"_546":523},{"_178":523,"_546":528},{"_178":528,"_546":533},{"_178":533,"_546":538},{"_178":538,"_546":-5},"versionNumber","page","hasNext","actionData","errors"]

jhiller

IncubatorTempHumidityTracker

History for settings.local.json